Wij zijn al 20 jaar wielbouwers op maat!
Er is veel veel meer dan wat hier te vinden is...
Gratis en vrijblijvend advies op +32468035736
Prijzen 21% BTW inclusief
Referentie : GMPO1401400V1
Merk : SAPIM
Gewicht : 1.06gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : SILVER
Velgbreedte :
Naaftype :
Most common material for nipples, brass nipples are generally nickel coated to ensure good corrosion resistance. Most wheel building robots can only work with brass nipples. Sapim offer brass nipples in silver and black.
Weight
64 pcs weight Polyax 12mm 60.48 g
64 pcs weight Polyax 14mm 68.19 g
64 pcs weight Polyax 16mm 76.42 g
https://www.sapim.be/nipples/material/brass
Referentie : GMPO1401400CZ
Merk : SAPIM
Gewicht : 1.06gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
Most common material for nipples, brass nipples are generally nickel coated to ensure good corrosion resistance. Most wheel building robots can only work with brass nipples. Sapim offer brass nipples in silver and black.
Weight
64 pcs weight Polyax 12mm 60.48 g
64 pcs weight Polyax 14mm 68.19 g
64 pcs weight Polyax 16mm 76.42 g
https://www.sapim.be/nipples/material/brass
Referentie : GICR1431000 ZOI-ZD SAP1518\
1
Merk : SAPIM
Gewicht : 5.5gr.
Materiaal : STEEL STAINLESS
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
The CX-Ray still receives one of the best results in fatigue testing of any spoke. Its unique strength and flexibility make the CX-Ray suitable for most bicycle disciplines. The middle section of the spoke is drawn then pressed in a special mold to form its specific profile. CX-Ray spokes are used by top bike racers and triathletes around the world. Even downhillers use them, recognizing their strength and flexibility. Special alloy treatment and sophisticated production make this all possible. The CX-Ray fits in all standard hub holes.
No extra hub hole design; hub manufacturer‘s guarantee is unaffected.
Almost as light as Titanium.
More long lasting than any other spokes on the market.
Extremely high fatigue test results.
Special alloy treatment and sophisticated production.
The best aerodynamic elliptic spoke available.
Produced from high-tensile, fatigue-resistant 18/8 stainless steel conforming to the Sapim quality standard specifications.
Technical specs
Weight: (64 pcs x 260 mm lg) 272 g
Quality: AISI 302
Strength on middle section: 1600 N/mm2
https://www.sapim.be/spokes/aero/cx-ray
Referentie : GAPO1401400ZI
Merk : SAPIM
Gewicht : 0.35gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : SILVER
Velgbreedte :
Naaftype :
Aluminum is the material of choice for higher performance. For this purpose, Sapim has chosen the highest aluminum grade possible (7075 T6) for this sort of usage. It combines light weight, strength and corrosion resistance. The anodized surface treatment provides various color possibilities.
We offer aluminum nipples in: silver, black, red, orange, gold, blue, green and purple. Sapim’s state of the art manufacturing process ensures the best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
Weight
64 pcs weight Polyax Aluminum 12mm 19.30 g
64 pcs weight Polyax Aluminum 14mm 21.82 g
64 pcs weight Polyax Aluminum 16mm 24.80 ghe best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
https://www.sapim.be/nipples/material/aluminium
Referentie : GAPO1401400RO
Merk : SAPIM
Gewicht : 0.35gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : RED
Velgbreedte :
Naaftype :
Aluminum is the material of choice for higher performance. For this purpose, Sapim has chosen the highest aluminum grade possible (7075 T6) for this sort of usage. It combines light weight, strength and corrosion resistance. The anodized surface treatment provides various color possibilities.
We offer aluminum nipples in: silver, black, red, orange, gold, blue, green and purple. Sapim’s state of the art manufacturing process ensures the best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
Weight
64 pcs weight Polyax Aluminum 12mm 19.30 g
64 pcs weight Polyax Aluminum 14mm 21.82 g
64 pcs weight Polyax Aluminum 16mm 24.80 ghe best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
https://www.sapim.be/nipples/material/aluminium
Referentie : 0903442
Merk : QT
Gewicht : 0gr.
Materiaal : STEEL
Spaakgaten :
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
KETTINGHANGER VOOR THRU AXLE DIAMETER 12MM BREEDTE 130-150MM
Ideaal om de kader te beschermen tijdens het kuisen of vervoeren van de fiets
Thru axle 12mm
Naafbreedte: 130-150mm
Referentie : #90272
Merk : NEWMEN
Gewicht : 465gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : DISC
Kleur : BLACK GRAY
Velgbreedte : 19,0 24,0 25,0 OS 0
Naaftype :
SL series performantie aero ALU velg
Wordt gebouwd met speciale spaakrondellen voor duurzaamheid.
Specifications:
Road, Cyclocross
Wheel Size:28"
Tyre Type:clincher tyre
Number of Spokes:24
Brake Type:disc
Technical Information:
Weight Limit:120 kg (system weight)
Air Pressure (max.):7.5 bars
Recommended Tyre Width:1.0 - 1.3" (25 mm - 33 mm)
Features:lightweight rim with aero shape
max. spoke tension 1200N
Referentie : Gravel 26 FRONT 2:1 24H Orn
Merk : WHEELSTUFF
Gewicht : 436gr.
Materiaal : CARBON
Spaakgaten : 24
Remtype : DISC
Kleur : BLACK
Velgbreedte : 25,0 30,0 36,0 OS 0,0
Naaftype :
This a 2:1 Rim and need special hubs with 16 to 8 drilling
Ask for our advice :)
Referentie : Luc Scram Gravel 26 New OFFSET 24H Orn test
Merk : WHEELSTUFF
Gewicht : 436gr.
Materiaal : CARBON
Spaakgaten : 24
Remtype : DISC
Kleur : BLACK
Velgbreedte : 25,0 30,0 36,0 OS 2,0
Naaftype :
Referentie : Gravel 26 New OFFSET 28H Orn
Merk : WHEELSTUFF
Gewicht : 436gr.
Materiaal : CARBON
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK MATTE
Velgbreedte : 25,0 30,0 36,0 OS 2,0
Naaftype :
Type: Hookless 2. Hole: 28H
Disc Brake
Internal/External Width: 25mm/30mm5. Depth: 36mm
Asymmetric drilling, 2mm
UD matt finish
14/14 X2/X2
25,0 30,0 36,0 OS 2,0
Referentie : RHP5CLSP24N142XDR
Merk : HOPE
Gewicht : 280gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 142 TA
Key Features
Improved sealing to stop dirt ingress and to reduce drag
New Labyrinth seal has zero drag for incredible freewheeling performance
New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
New step down axle design for a stiffer more durable freehub
New hub body profile for increased stiffness without adding weight
Fully serviceable and rebuildable with simple tools
Available with all modern freehub bodies
End spacers can be easily swapped to suit different frame and axle standards
Referentie : RHP5CLSP24N142SA
Merk : HOPE
Gewicht : 280gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 142 TA
Key Features
Improved sealing to stop dirt ingress and to reduce drag
New Labyrinth seal has zero drag for incredible freewheeling performance
New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
New step down axle design for a stiffer more durable freehub
New hub body profile for increased stiffness without adding weight
Fully serviceable and rebuildable with simple tools
Available with all modern freehub bodies
End spacers can be easily swapped to suit different frame and axle standards
Referentie : MCFC28TLR28DTe
Merk : MC
Gewicht : 385gr.
Materiaal : CARBON 6K WEAVE
Spaakgaten : 28
Remtype :
Kleur : 6K WEAVE TO BLACK
Velgbreedte : 26,0 31,0 28,0 OS 2
Naaftype :
Key features:
What it is NOT, a regular rim with conventional carbon layup...
6K Weaving Rims, exclusive and flawless carbon finish rims with outstanding technical values, MADE in Europe!
These rims can be used with spoke washers, the secret of performance wheels that last forever!
Belangrijkste kenmerken:
Wat het NIET is, een gewone velg met conventionele carbon inleg...
6K Weaving velgen, exclusieve en onberispelijke velgen met carbonafwerking met uitstekende technische waarden, MADE in Europe!
Deze velgen kunnen worden gebruikt met spaakringen, het geheim van prestatiewielen die eeuwig meegaan!
Referentie : MCFC28TLR24DTe testset winkel EMC+HMC
Merk : MC
Gewicht : 385gr.
Materiaal : CARBON 6K WEAVE
Spaakgaten : 24
Remtype :
Kleur : 6K WEAVE TO BLACK
Velgbreedte : 26,0 31,0 28,0 OS 2
Naaftype :
Key features:
What it is NOT, a regular rim with conventional carbon layup...
6K Weaving Rims, exclusive and flawless carbon finish rims with outstanding technical values, MADE in Europe!
These rims can be used with spoke washers, the secret of performance wheels that last forever!
Belangrijkste kenmerken:
Wat het NIET is, een gewone velg met conventionele carbon inleg...
6K Weaving velgen, exclusieve en onberispelijke velgen met carbonafwerking met uitstekende technische waarden, MADE in Europe!
Deze velgen kunnen worden gebruikt met spaakringen, het geheim van prestatiewielen die eeuwig meegaan!
Referentie : FSD40CM-26T-SUD
Merk : WP
Gewicht : 375gr.
Materiaal : CARBON UD
Spaakgaten : 24
Remtype :
Kleur : BLACK MATTE
Velgbreedte : 19,0 26,0 40,0 OS 0
Naaftype :
Key features:
Weight 375g (+/- 15g)
Rim height 40 mm
External wide 26 mm
Internal wide 19 mm
Use Road 700c
Finish UD Matt
Production Feder / Ultra Light
Tubeless Ready / Symmetrical
Hooked Rim Edge
Max. spaakspanning: 130kg/f
Geen max. rijders gewicht
Road: 110psi / 8 bar
Referentie : GAPO1401400 ZA--- SAP0096
Merk : SAPIM
Gewicht : 0.35gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
Aluminum is the material of choice for higher performance. For this purpose, Sapim has chosen the highest aluminum grade possible (7075 T6) for this sort of usage. It combines light weight, strength and corrosion resistance. The anodized surface treatment provides various color possibilities.
We offer aluminum nipples in: silver, black, red, orange, gold, blue, green and purple. Sapim’s state of the art manufacturing process ensures the best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
Weight
64 pcs weight Polyax Aluminum 12mm 19.30 g
64 pcs weight Polyax Aluminum 14mm 21.82 g
64 pcs weight Polyax Aluminum 16mm 24.80 ghe best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
https://www.sapim.be/nipples/material/aluminium
Referentie : GAPO1401400BL
Merk : SAPIM
Gewicht : 0.35gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : BLUE
Velgbreedte :
Naaftype :
Aluminum is the material of choice for higher performance. For this purpose, Sapim has chosen the highest aluminum grade possible (7075 T6) for this sort of usage. It combines light weight, strength and corrosion resistance. The anodized surface treatment provides various color possibilities.
We offer aluminum nipples in: silver, black, red, orange, gold, blue, green and purple. Sapim’s state of the art manufacturing process ensures the best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
Weight
64 pcs weight Polyax Aluminum 12mm 19.30 g
64 pcs weight Polyax Aluminum 14mm 21.82 g
64 pcs weight Polyax Aluminum 16mm 24.80 ghe best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
https://www.sapim.be/nipples/material/aluminium
Referentie : GAPO1401400GR
Merk : SAPIM
Gewicht : 0.35gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : GREEN
Velgbreedte :
Naaftype :
Aluminum is the material of choice for higher performance. For this purpose, Sapim has chosen the highest aluminum grade possible (7075 T6) for this sort of usage. It combines light weight, strength and corrosion resistance. The anodized surface treatment provides various color possibilities.
We offer aluminum nipples in: silver, black, red, orange, gold, blue, green and purple. Sapim’s state of the art manufacturing process ensures the best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
Weight
64 pcs weight Polyax Aluminum 12mm 19.30 g
64 pcs weight Polyax Aluminum 14mm 21.82 g
64 pcs weight Polyax Aluminum 16mm 24.80 ghe best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
https://www.sapim.be/nipples/material/aluminium
Referentie : GAPO1401400LI
Merk : SAPIM
Gewicht : 0.35gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : PURPLE
Velgbreedte :
Naaftype :
Aluminum is the material of choice for higher performance. For this purpose, Sapim has chosen the highest aluminum grade possible (7075 T6) for this sort of usage. It combines light weight, strength and corrosion resistance. The anodized surface treatment provides various color possibilities.
We offer aluminum nipples in: silver, black, red, orange, gold, blue, green and purple. Sapim’s state of the art manufacturing process ensures the best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
Weight
64 pcs weight Polyax Aluminum 12mm 19.30 g
64 pcs weight Polyax Aluminum 14mm 21.82 g
64 pcs weight Polyax Aluminum 16mm 24.80 ghe best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
https://www.sapim.be/nipples/material/aluminium
Referentie : 190104036
Merk : RYDE
Gewicht : 0gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
The lightweight aluminium valve has a round, rubber seal at the bottom. This way the valve fits not only perfectly with all Ryde rims, but also perfectly with almost every other brand rim. The nut on top of the rim has a rubber sealing to avoid scratching the rim and offering resistance to turn loose by itself. The insert of the valve is removable with the added tool for fast filling of the tyre with tubeless fluid.
lenght 36 mm, 60 mm, 80 mm
colour : black
Referentie : 190104060
Merk : RYDE
Gewicht : 0gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
The lightweight aluminium valve has a round, rubber seal at the bottom. This way the valve fits not only perfectly with all Ryde rims, but also perfectly with almost every other brand rim. The nut on top of the rim has a rubber sealing to avoid scratching the rim and offering resistance to turn loose by itself. The insert of the valve is removable with the added tool for fast filling of the tyre with tubeless fluid.
lenght 36 mm, 60 mm, 80 mm
colour : black
Referentie : 700230
Merk : RYDE
Gewicht : 540gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype :
Kleur : BLACK
Velgbreedte : 20,8 25,5 24,8 OS 3
Naaftype :
EDGE SERIES
Strong enough to withstand serious use, light enough to be at the front of the pack. With technologies carried over from the Trace Series, the Edge Series is up with the very best rims out there. The advantages offered by both series are wider rims to extract the maximum performance out of the tires. The offset of the spoke holes and the directional drilling makes a laced wheels not only stiffer and stronger, but will hold spoke tension much longer.
EDGE R 25
This rim our allrounder with a modern wide shape and the medium sized height of 24,9mm (UCI conform as classic rim shape). The symmetric version is foreseen for front wheels.
Referentie : DUXCV2002
Merk : DUKE
Gewicht : 376gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype :
Kleur : BLACK
Velgbreedte : 23,5 26,4 16 OS 2
Naaftype :
The Lucky Star Ultra is a lightweight pure XC aluminium rim. It is characterised by its unrivalled stiffness/weight and strength/weight ratios, thanks in part to the use of Dynamal aluminium.
DUKE has created an innovative profile, following its own experience with a very strict specification.This rim inaugurates a new modern geometry with an asymmetric profile and hookless walls.The rim holes are off-centre (offset), which makes it possible to close the spoke umbrella more tightly. This rim is more stable and increases the lateral stiffness of the wheel.The spoke tensions between the two plies are more balanced, which guarantees a better durability of the wheel.The hookless rim walls allow for both rim reinforcement and weight reduction.
Referentie : VIDUVE83
Merk : DUKE
Gewicht : 406gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype :
Kleur : BLACK
Velgbreedte : 25,5 28,5 17 OS 2,1
Naaftype :
The Lucky Star HD 6TERS are aluminium rims designed for all types of XC, XC racing and trail riding. The front/rear widths are differentiated: 28mm/26mm or 30mm/28mm depending on the tyre section.
They are characterised by good lateral stiffness and very good strength at a low weight, thanks in part to the use of Dynamal aluminium. The rims feature a new, modern, lower geometry with an asymmetrical profile and hookless walls. The rim holes are off-centre (offset), which makes it possible to close the spoke umbrella more tightly. This makes the rim more stable and increases the lateral stiffness of the wheel. The spoke tensions between the two plies are more balanced, which guarantees a better durability of the wheel. The hookless rim walls allow for both rim reinforcement and weight reduction.
Referentie : NVDT350BRCL32148 XD
Merk : DT SWISS
Gewicht : 250gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
DT Swiss 350 Center Lock (old design) met verwijderbare sticker
Referentie : NVDT350B15FCL32B
Merk : DT SWISS
Gewicht : 142gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 15 X 110 TA BOOST
DT Swiss 350 Center Lock (old design) met verwijderbare sticker
Referentie : NOTRTCT90011BOX
Merk : NOTUBES
Gewicht : 372gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK
Velgbreedte : 23,0 26,3 15,8 OS 2
Naaftype :
FEATURES:
23mm internal rim width for 38mm gravel to 2.25" XC tires
Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats
Laterally stiffer and stronger for improved handling
Wider but even lighter than the original Crest
More durable rim shape and alloy
Most trusted tubeless system for easy setup and low maintenance
Legendary Crest climbing and speed in a high volume rim
DESCRIPTION:
The original Crest rim helped introduce XC racers everywhere to the performance advantages of tubeless. With fast engagement and simple Today’s Crest MK3 is wider and even more versatile, while keeping all the characteristics that make Crest rims so fast on the course. Though wider, the Crest MK3 rim is even lighter than previous versions to accelerate quicker and attack the climbs. WideRight 23mm internal width improves stability with wider tires for more control on even the most technical sections of trail. Unlike many rims that have become too wide to work with 2.25” tires, the Crest MK3’s 23mm internal width maintains razor-sharp handling at speed. Inspired by our carbon technology, the Crest MK3 rim shape adds strength and virtually eliminates the chance of a tire pinch flat, allowing you to run the perfect tire pressure for any condition. That means better handling, less rolling resistance, and more traction. Refined over the past 15 years, our Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance.
Referentie : RHP432N142TSA
Merk : HOPE
Gewicht : 304gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 142 TA
Incredibly versatile and easily serviceable hub with a proven reputation for bullet proof quality time and time again. The 6 anodized colors throughout the range give the ultimate in bike customization.
Key Features
10, 11 and 12 speed compatible
Sealed stainless Steel cartridge bearings throughout
Hub shell machined from a single forged aluminum billet
Standard 6 bolt disc fitting
4 Pawl ratchet system with 44 tooth engagement (8.2 deg)
Larger spoke flange to enable stiffer wheel builds
Unsurpassed reliability
Available in 135mm and 142mm and 148mm widths
Referentie : RHP432R142TXD
Merk : HOPE
Gewicht : 300gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : RED
Velgbreedte :
Naaftype : 12 X 142 TA
Incredibly versatile and easily serviceable hub with a proven reputation for bullet proof quality time and time again. The 6 anodized colors throughout the range give the ultimate in bike customization.
Key Features
10, 11 and 12 speed compatible
Sealed stainless Steel cartridge bearings throughout
Hub shell machined from a single forged aluminum billet
Standard 6 bolt disc fitting
4 Pawl ratchet system with 44 tooth engagement (8.2 deg)
Larger spoke flange to enable stiffer wheel builds
Unsurpassed reliability
Available in 135mm and 142mm and 148mm widths
Referentie : GAPO1401400GO
Merk : SAPIM
Gewicht : 0.35gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : GOLD
Velgbreedte :
Naaftype :
Aluminum is the material of choice for higher performance. For this purpose, Sapim has chosen the highest aluminum grade possible (7075 T6) for this sort of usage. It combines light weight, strength and corrosion resistance. The anodized surface treatment provides various color possibilities.
We offer aluminum nipples in: silver, black, red, orange, gold, blue, green and purple. Sapim’s state of the art manufacturing process ensures the best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
Weight
64 pcs weight Polyax Aluminum 12mm 19.30 g
64 pcs weight Polyax Aluminum 14mm 21.82 g
64 pcs weight Polyax Aluminum 16mm 24.80 ghe best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
https://www.sapim.be/nipples/material/aluminium
Referentie : GAPO1401400OR
Merk : SAPIM
Gewicht : 0.35gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : ORANGE
Velgbreedte :
Naaftype :
Aluminum is the material of choice for higher performance. For this purpose, Sapim has chosen the highest aluminum grade possible (7075 T6) for this sort of usage. It combines light weight, strength and corrosion resistance. The anodized surface treatment provides various color possibilities.
We offer aluminum nipples in: silver, black, red, orange, gold, blue, green and purple. Sapim’s state of the art manufacturing process ensures the best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
Weight
64 pcs weight Polyax Aluminum 12mm 19.30 g
64 pcs weight Polyax Aluminum 14mm 21.82 g
64 pcs weight Polyax Aluminum 16mm 24.80 ghe best quality available on the market. As a consequence Sapim’s Aluminum nipples has become the benchmark in the market.
https://www.sapim.be/nipples/material/aluminium
Referentie : #90585
Merk : NEWMEN
Gewicht : 565gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK GRAY
Velgbreedte : 30,0 33,8 20,0 OS 0 ERD 596
Naaftype :
De allerlaatste... SL EG 30
Wij gebruiken enkel de SL versie.
TECHNICAL INFORMATION / DESCRIPTION
Super durable rim, engineered to withstand the thoughest Enduro and DH riding. Based on our lightweight and durable NEWMEN Evolution SL rims, we have reinforced the profile even further resulting in the Evolution E.G. rims being extremely resistant against dents. In fact they are 40% more durable than the SL A.30. As with our regular rims, the profile is completly round and the flared flanges keep the tyre rounder on top of making the rims so hard-wearing against dents and deformation.
Eyelets
no
Washer Required
yes
Model Family
Evolution SL
Intended use
Trail bis Downhill
Spoke Hole Number
28h / 32h
Rim Profile
hookless tubeless ready
Weight
530g / 560g
Inner Width
30 mm
Diameter
27,5" / 29"
Max. System Weight
180kg
Material
6069 Aluminium
Referentie : #90726
Merk : NEWMEN
Gewicht : 538gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK GRAY
Velgbreedte : 30,0 OS
Naaftype :
Is een wrapping testvelg voor iemand die er niet mee zit en een goedkope All Mountain velg zoekt.
Slechts 1 stuk beschikbaar!
Wij gebruiken enkel de SL versie
TECHNICAL INFORMATION / DESCRIPTION
High-end all-mountain aluminium rim for riders who want the benefits of wide rims. 30mm inner width allow for low pressures and due to the high dent resistance it is even suitable for enduro riders in search of a very light rim.
Weight
480g / 510g
Material
6069 Aluminium
Intended use
Cross Country bis Enduro
Spoke Hole Number
28h / 32h
Diameter
27,5" / 29"
Rim Profile
hookless tubeless ready
Washer Required
yes
Inner Width
30 mm
Eyelets
no
Max. System Weight
150kg
Model Family
Evolution SL
Referentie : Luc Duro #90519 testset
Merk : NEWMEN
Gewicht : 310gr.
Materiaal : CARBON
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK GRAY
Velgbreedte : 25,0 OS ERD 600
Naaftype :
TECHNICAL INFORMATION / DESCRIPTION
Lightweight rims with just the right amount of stiffness make for blazing fast XC wheelsets. The NEWMEN FADE rear hub is significantly quieter compared to other hubs which makes for a completely different experience on the trail. Combining this hub technology with the new X.A.25 carbon fiber rim results in a wheelset with focus on durability and light weight.
Weight
310g
Washer Required
no
Rim Profile
hookless tubeless ready
Eyelets
no
Intended use
Cross Country
Spoke Hole Number
28h
Max. System Weight
130kg
Material
unidirectional (UD) Carbon
Diameter
29"
Inner Width
25 mm
Model Family
Advanced SL
Referentie : #90521
Merk : NEWMEN
Gewicht : 335gr.
Materiaal : CARBON
Spaakgaten : 28
Remtype :
Kleur : BLACK GRAY
Velgbreedte : 30,0 OS ERD 597
Naaftype :
TECHNICAL INFORMATION / DESCRIPTION
A new generation of XC wheels! Wide rims with low weight make for confidence inspiring and fast XC-/Trailbike wheelsets. The 30mm inner width are confidence inspiring on the downhills while minimizing rolling resistance on all surfaces. The NEWMEN FADE rear hub is significantly quieter compared to other hubs which, in combination with the X.A.30 rims, results in wheelsets focused on durability and light weight.
Referentie : #90571
Merk : NEWMEN
Gewicht : 400gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK GRAY
Velgbreedte : 25,0 27,5 17,0 OS 0
Naaftype :
WIJ GEBRUIKEN ENKEL DE SL VELGEN!!
Je hebt zeker geen 30mm velgen nodig om een goed XC wielset te gebruiken.
Bij Aluminium velgen is 400gr voor een velg een zeer goede compromis in velgbreedte en gewicht.
TECHNICAL INFORMATION / DESCRIPTION
High-end aluminium rim. Due to the high dent resistance achieved by our flared rim flanges it is ideally suited for modern aggressive trail bikes while still being light enough for XC/marathon riders.
Intended use
Cross Country
Diameter
27,5" / 29"
Max. System Weight
130kg
Weight
380g / 400g
Material
6069 Aluminium
Eyelets
no
Washer Required
yes
Rim Profile
hookless tubeless ready
Model Family
Evolution SL
Inner Width
25 mm
Referentie : #90586
Merk : NEWMEN
Gewicht : 570gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK GRAY
Velgbreedte : 30,0 33,8 20,0 OS 0 ERD 596
Naaftype :
Wij gebruiken enkel de SL versie.
TECHNICAL INFORMATION / DESCRIPTION
Super durable rim, engineered to withstand the thoughest Enduro and DH riding. Based on our lightweight and durable NEWMEN Evolution SL rims, we have reinforced the profile even further resulting in the Evolution E.G. rims being extremely resistant against dents. In fact they are 40% more durable than the SL A.30. As with our regular rims, the profile is completly round and the flared flanges keep the tyre rounder on top of making the rims so hard-wearing against dents and deformation.
Eyelets
no
Washer Required
yes
Model Family
Evolution SL
Intended use
Trail bis Downhill
Spoke Hole Number
28h / 32h
Rim Profile
hookless tubeless ready
Weight
530g / 560g
Inner Width
30 mm
Diameter
27,5" / 29"
Max. System Weight
180kg
Material
6069 Aluminium
Referentie : NA.FW.0285
Merk : FUNWORKS
Gewicht : 135gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : LEFTY 2.0
FUN WORKS N-LIGHT LEFTY 2.0 IS DISC 6-BOLT FRONT HUB
Weight Weenies will have a lot of joy with this noble piece!
A Smart Construction and superlight high quality components are making the Fun Works N-Light Lefty to the perfect Lightweight hub for Cross Country or Trail usage.
Model: N-Light Lefty front hub
Hole Count: 32
Weight: 135 Gramm
Disc Mount: IS (6-bolt)
Axle Standard: Cannondale Lefty 2.0 (60mm)
Type: Front Wheel
Hub-Type: Lefty
Brake interface: Disc IS (6-bolt)
Weight g: 135
Colour: Black, Red, Blue
Related links to Fun Works N-Light Lefty 2.0 IS disc 6-Bolt Front Hub
Referentie : FG.FW.0035
Merk : FUNWORKS
Gewicht : 493gr.
Materiaal : ALUMINUM NEW ERA
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK
Velgbreedte : 30,0 35,0 21,6 OS 0
Naaftype :
FUN WORKS AMRIDE 30 RIM 29"BLACK
Fun Works Amride 30 the Allrounder
The perfect MTB rim for riders who want to tease out the most performance out of their tires.
With an inner width of 30mm this rim can be used besides usual MTB Tires also with the most new Plus Size Tires.The specially developed New Era Alloy wich was used for the production of the Amride 30 makes this rim despite the incredible low weight extremly stiff.This rim feels at home on rooty trails and can be used from XC/Trail to agressive All Mountain. The tubeless ready design allows an easy tubeless setup and ensures the perfect fit of the tire.
Details:
Hole Count 32
Weight 495 Gramm
Use for Cross Country/Trail/All Mountain
Material New Era Aluminium
max. spoke tension: 1200N
max. air pressure: 3bar
ETRTO: 622
ERD: 597
tire pressure 2.5 : 2.4bar (44psi)
tire pressure 2.8 : 2,0bar (40psi)
tire pressure 3.0 : 1,8bar (38psi)
recommend Tape width: 32mm
Specials:
Sandblast Finish
Rim Width 35mm outside 30mm inside
Max System Weight: 120Kg
Size: 29
Brake interface: Disc Brake
Field of application: All Mountain
Weight g: 495
Inner width : 30mm
Max System Weight kg: 120
Colour: Black
Related links to Fun Works Amride 30 Rim 29"black
Referentie : FG.FW.0052
Merk : FUNWORKS
Gewicht : 560gr.
Materiaal : ALUMINUM NEW ERA
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK
Velgbreedte : 30,0 35,0 21,6 OS 0
Naaftype :
FUN WORKS TRACK MACK 30 RIM 29"BLACK
Hybrid rim specially designed for heavy use in Gravity or Freeride bikes and/or for the high loads in E-bikes.
The Track Mack comes with reinforced sidewalls 30mm inside width and is extremely durable and stable.The specially developed New Era Alloy wich was used for the production of the Track Mack 30 makes this rim despite the incredible low weight extremly stiff.
The rim can be used up to a maximum system weight of 130KG in your Gravity or Freeride Bike and/or in an E-Bike at XC to All Mountain use up to 150KG system weight.
The tubeless ready design allows an easy tubeless setup and ensures the perfect fit of the tire.
Details:
Hole Count 32
Weight 550 Gramm
Use for Gravity,Freeride,E-Bike
Material New Era Aluminium
max. spoke tension: 1200N
max. air pressure: 3bar
ERD: 597
ETRTO: 622
tire pressure 2.5 : 2.4bar (44psi)
tire pressure 2.8 : 2,0bar (40psi)
tire pressure 3.0 : 1,8bar (38psi)
recommend Tape width: 32mm
Specials:
Sandblast Finish
Rim Width 35mm outside 30mm inside
Max System Weight for bei Gravity oder Freeride: 130KG
Max System Weight for E-Bike XC to All Mountain use: 150KG
Size: 29
Brake interface: Disc Brake
Field of application: Enduro, Freeride, E-Bike
Weight g: 550
Inner width : 30mm
Max System Weight kg: 130
Colour: Black
Related links to Fun Works Track Mack 30 Rim 29"black
Referentie : Luc Duro XHMTBSLR28MN test
Merk : CARBON_TI
Gewicht : 196gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : IS (6-BOLT)
Kleur : BLACK MATTE
Velgbreedte :
Naaftype : 5 X 135 QR
X-Hub SL Disc X-12 28
Superlight MTB or Road Disc X-12 Thru axle rear hub with 28 holes oversized Al7075-T6 CNC machined body and axle, I.S. disc rotor fixing system, Hi-performance sealed bearings with external preload system, Al7075-T6 free wheel Shimano/SRAM 9-10-11-12s compatible (XD Compatible SRAM 11-12 speed driver in optional).
(X-Hub SL Disc X-12 28) is a very lightweight and sophisticated product and it is intended for Cross Country or Marathon use.
Warranty voids when used on an electric-assisted bicycle (E-bike).
Several anodized colours available.
Conversion kit to swap from X-12 thru axle to quick release available (sold separately).
100% Made in Italy.
CODE: XHMSLX1228
Referentie : FG.FW.0032
Merk : FUNWORKS
Gewicht : 465gr.
Materiaal : ALUMINUM NEW ERA
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK
Velgbreedte : 30,0 35,0 21,6 OS 0
Naaftype :
FUN WORKS AMRIDE 30 RIM 27,5" | 650B BLACK
Fun Works Amride 30 the Allrounder
The perfect MTB rim for riders who want to tease out the most performance out of their tires.
With an inner width of 30mm this rim can be used besides usual MTB Tires also with the most new Plus Size Tires.The specially developed New Era Alloy wich was used for the production of the Amride 30 makes this rim despite the incredible low weight extremly stiff.This rim feels at home on rooty trails and can be used from XC/Trail to agressive All Mountain. The tubeless ready design allows an easy tubeless setup and ensures the perfect fit of the tire.
Details:
Hole Count 32
Weight 465 Gramm
Use for Cross Country/Trail/All Mountain
Material New Era Aluminium
max. spoke tension: 1200N
max. air pressure: 3bar
ERD: 559
ETRTO: 584
tire pressure 2.5 : 2.4bar (44psi)
tire pressure 2.8 : 2,0bar (40psi)
tire pressure 3.0 : 1,8bar (38psi)
recommend Tape width: 32mm
Specials:
Sandblast Finish
Rim Width 35mm outside 30mm inside
Max System Weight: 120Kg
Size: 27.5
Brake interface: Disc Brake
Field of application: All Mountain
Weight g: 465
Inner width : 30mm
Max System Weight kg: 120
Colour: Black
Related links to Fun Works Amride 30 Rim 27,5" | 650b black
Referentie : FG.FW.0053
Merk : FUNWORKS
Gewicht : 530gr.
Materiaal : ALUMINUM NEW ERA
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK
Velgbreedte : 30,0 35,0 21,6 OS 0
Naaftype :
FUN WORKS TRACK MACK 30 RIM 27,5" | 650B BLACK
Hybrid rim specially designed for heavy use in Gravity or Freeride bikes and/or for the high loads in E-bikes.
The Track Mack comes with reinforced sidewalls 30mm inside width and is extremely durable and stable.The specially developed New Era Alloy wich was used for the production of the Track Mack 30 makes this rim despite the incredible low weight extremly stiff.
The rim can be used up to a maximum system weight of 130KG in your Gravity or Freeride Bike and/or in an E-Bike at XC to All Mountain use up to 150KG system weight.
The tubeless ready design allows an easy tubeless setup and ensures the perfect fit of the tire.
Details:
Hole Count 32
Weight 530 Gramm
Use for Gravity,Freeride,E-Bike
Material New Era Aluminium
max. spoke tension: 1200N
max. air pressure: 3bar
ERD: 559
ETRTO: 584
tire pressure 2.5 : 2.4bar (44psi)
tire pressure 2.8 : 2,0bar (40psi)
tire pressure 3.0 : 1,8bar (38psi)
recommend Tape width: 32mm
Specials:
Sandblast Finish
Rim Width 35mm outside 30mm inside
Max System Weight for bei Gravity oder Freeride: 130KG
Max System Weight for E-Bike XC to All Mountain use: 150KG
Size: 27.5
Brake interface: Disc Brake
Field of application: Enduro, Freeride, E-Bike
Weight g: 530
Inner width : 30mm
Max System Weight kg: 130
Colour: Black
Related links to Fun Works Track Mack 30 Rim 27,5" | 650b black
Referentie : NVDT240R24CL8486S
Merk : DT SWISS
Gewicht : 212gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 142 TA
PRODUCT DETAILS
With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies the tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfers the energy invested directly into acceleration thanks to the 36 teeth.
MATERIAL
Aluminum
FREEHUB SYSTEM
Ratchet EXP 36
Referentie : #90588
Merk : NEWMEN
Gewicht : 550gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK GRAY
Velgbreedte : 30,0 33,8 20,0 OS 0 ERD 596
Naaftype :
Wij gebruiken enkel de SL versie.
Product details
"Super durable rim, engineered to withstand the thoughest Enduro and DH riding. Based on our lightweight and durable NEWMEN Evolution SL rims, we have reinforced the profile even further resulting in the Evolution E.G. rims being extremely resistant against dents. In fact they are 40% more durable than the SL A.30. As with our regular rims, the profile is completly round and the flared flanges keep the tyre rounder on top of making the rims so hard-wearing against dents and deformation. Materials are deployed precisely at critical points and shaved off elsewhere. The flat spoke bed is designed to work with our special washers for extremely high spoke tension values whilst keeping the amount of material used down to a minimum. In contrast, the flanges are substantially thicker than on other rims in the same weight class for added strength and durability. In combination with our Newmen Evolution SL hubs and Sapim Race (2,0-1,8-2,0) spokes it is possible to build a durable and lightweight gravity wheelset. "
colour
black/grey
size
584x30
material
alloy
weight
0,55
Referentie : BZ.DT.0002
Merk : DT SWISS
Gewicht : 26gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype :
DT SWISS CENTERLOCK ADAPTER to IS 6 BOLT DISC ROTOR
DT-Swiss CenterLock adaptor.
Allows 6-bolt rotors to be used on CenterLock hubs.
Rotor thickness between 1.8mm and 2.2mm, maximum rotor size 210mm
Referentie : #90276 Dark Silver newer #90588 Dark Grey
Merk : NEWMEN
Gewicht : 550gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK
Velgbreedte : 30,0 33,8 20,0 OS 0 ERD 596
Naaftype :
Wij gebruiken enkel de SL versie.
Dit is een speciale kleur zwart/Zilver
Laatste stuk.
Product details
"Super durable rim, engineered to withstand the thoughest Enduro and DH riding. Based on our lightweight and durable NEWMEN Evolution SL rims, we have reinforced the profile even further resulting in the Evolution E.G. rims being extremely resistant against dents. In fact they are 40% more durable than the SL A.30. As with our regular rims, the profile is completly round and the flared flanges keep the tyre rounder on top of making the rims so hard-wearing against dents and deformation. Materials are deployed precisely at critical points and shaved off elsewhere. The flat spoke bed is designed to work with our special washers for extremely high spoke tension values whilst keeping the amount of material used down to a minimum. In contrast, the flanges are substantially thicker than on other rims in the same weight class for added strength and durability. In combination with our Newmen Evolution SL hubs and Sapim Race (2,0-1,8-2,0) spokes it is possible to build a durable and lightweight gravity wheelset. "
colour
black/grey
size
584x30
material
alloy
weight
0,55
Referentie : #90728
Merk : NEWMEN
Gewicht : 490gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK GRAY
Velgbreedte : 30,0 OS
Naaftype :
Wij gebruiken enkel de SL versie
TECHNICAL INFORMATION / DESCRIPTION
High-end all-mountain aluminium rim for riders who want the benefits of wide rims. 30mm inner width allow for low pressures and due to the high dent resistance it is even suitable for enduro riders in search of a very light rim.
Weight
480g / 510g
Material
6069 Aluminium
Intended use
Cross Country bis Enduro
Spoke Hole Number
28h / 32h
Diameter
27,5" / 29"
Rim Profile
hookless tubeless ready
Washer Required
yes
Inner Width
30 mm
Eyelets
no
Max. System Weight
150kg
Model Family
Evolution SL
Referentie : GERA1427000 ZOIZD--\
SAP1534
Merk : SAPIM
Gewicht : 6.24gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
Race
Race is a very popular double butted spoke. Build up tension is easy. Much less torsion and not as elastic as the Laser spokes are the key points. The Race provides a better shock absorption thanks to a thinner middle section than the one of a non-butted spokes. Dealers say about this traditional spoke: “Never change a winning team…”
Technical specs
Weight: 14G (64 pcs x 260 mm lg) 363 g
Quality: Stainless
Strength on middle section: 1300 N/mm2
Dimensions
Length: 135-310 mm
Diameter: 14G 2.0 - 1.8 - 2.0 mm
Options
Rod (without bend) or different bend
Self locking system
Black (oxidised or chromed)
Anti-rotation part
Oval head
2-sides threading
TCS
Referentie : GERA1431000 ZO-ZD SAP1502
Merk : SAPIM
Gewicht : 6.76gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
Race
Race is a very popular double butted spoke. Build up tension is easy. Much less torsion and not as elastic as the Laser spokes are the key points. The Race provides a better shock absorption thanks to a thinner middle section than the one of a non-butted spokes. Dealers say about this traditional spoke: “Never change a winning team…”
Technical specs
Weight: 14G (64 pcs x 260 mm lg) 363 g
Quality: Stainless
Strength on middle section: 1300 N/mm2
Dimensions
Length: 135-310 mm
Diameter: 14G 2.0 - 1.8 - 2.0 mm
Options
Rod (without bend) or different bend
Self locking system
Black (oxidised or chromed)
Anti-rotation part
Oval head
2-sides threading
TCS
Referentie : LB044
Merk : FUNWORKS
Gewicht : 260gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 142 TA
FUN WORKS N-LIGHT ONE CL DISC REAR HUB CENTERLOCK
The successor of the popular N-Light Evo hub
Fun Works has implemented numerous improvements on their new N-Light One hub.
The hub have been equipped with larger bearings to increase durability.In the new Freehub are working 4 simultaneously engaging pawls with a 48 teeth Ratchet Ring.The result is a 37,5% quicker engagement of the pawls (compared to the previous model N-Light Evo) and thus faster acceleration and more control in demanding terrain.The hub shell is forged and CNC machined for maximum durability furthermore a high durometer main seal is integrated into hub shell.The end caps with LipLock Seal Technology are protecting the bearings more effective and locks the caps into place.The N-Light One hub is still easy to convert to different axles standards without special tools.You just have to swap the end caps.Shimano standard compatible freehubs will be supplied ready to take 11speed Road or MTB cassettes.A spacer for 8/9/10speed Road or MTB Cassettes and for 11speed MTB Cassettes is included to each hub.
Model: N-Light One rear hub
Hole Count: 32
Weight: 250 Gramm
Disc Mount: Centerlock
Specials
4 Sealed cartridge bearings
Pawl System
4 Pawls
48teeth Ratchet Ring (with 7,5 degrees of engagement)
forged and CNC machined hub body
Integrated Durometer Seal
LipLock Seal End Caps
convertible to 5x135mm QR,10x135mm TB, 12x135mm TA und 12x142mm TA
laser etched logos
Use for : Cross Country,Trail,All Mountain,Enduro
Type: Rear Wheel
Hub-Type: Standard
Brake interface: Centerlock
Weight g: 250
Related links to Fun Works N-Light One CL disc Rear Hub Centerlock
Referentie : ERASE ROAD REAR HUB 28
Merk : ERASE
Gewicht : 218gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 142 TA
This is a V1 hub!!
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs get a 100x12 axle.
The rear hubs get a 142x12 axle.
Weight
Front : 120gr
Rear : 207gr
Spoke holes
24 or 28 holes.
J-Bend spokes or Berd spokes compatible.
Titanium freehub
We use Grade 5 titanium to make the freewheel. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (36 engagement points)
The ratchet technology is the more reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
Te hub geometry is a very important aspect of a hub design. It defines the spokes lenght but more importanly the wheel lateral rigidity. Further is the flange from the hub center, higher is the lateral stiffness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open hubs by hand just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are still searching an european company able to produce it)
Anodizing process : In-house
Price
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, bearings and improper assembly or maintenance by an unauthorized dealer.
Only for the initial owner.
Referentie : VLDTR46028DB
Merk : DT SWISS
Gewicht : 570gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK
Velgbreedte : 30,0 35,0 21,0 ERD 538
Naaftype :
PRODUCT DETAILS
The FR 560 was made to withstand the nastiest of rock gardens, the roughest of roots and the sketchiest of landings. The prototype proved to be World Championship material and the final product is now available for you to shred as hard as you want. Available as a classic 26inch, a 27.5inch and as a 29inch wagon wheel. The 30 mm inner rim width provides your tires with the support they need to roost through the berms at full speed.
MATERIAL ALUMINIUM
Referentie : VLDTR50032DB
Merk : DT SWISS
Gewicht : 498gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK
Velgbreedte : 22,0 26,0 23,0 ERD 596
Naaftype :
R 500
This rim is your robust and reliable companion for all rides.
PRODUCT DETAILS
Having a rim which supports your riding, day in, day out, over thousands of kilometers. The R 500 will deliver all that and much more at an unbeatable price-performacne ratio.
MATERIAL
ALUMINIUM
Referentie : GAPO1401600 ZA--- SAP0101
Merk : SAPIM
Gewicht : 0.35gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
Most common material for nipples, brass nipples are generally nickel coated to ensure good corrosion resistance. Most wheel building robots can only work with brass nipples. Sapim offer brass nipples in silver and black.
Weight
64 pcs weight Polyax 12mm 60.48 g
64 pcs weight Polyax 14mm 68.19 g
64 pcs weight Polyax 16mm 76.42 g
https://www.sapim.be/nipples/material/brass
Referentie :
Merk : WERK
Gewicht : 0gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
https://www.thewheelstuff.be/bike-blog/wheel-building-clinic/
Meer dan 20 jaar ervaring in 3uur?
Leer meer in 3 uur dan in 3 maand in avond onderwijs;-)
Een namiddag sessie van 3 uur, drankje en versnapering tussendoor komt op €150.00
Normaal elke zaterdagnamiddag in november, december en januari
Wheel Building Clinic Topics:
Stap 1 Wat?
Wat wil je bouwen?
Definiëring van materialen en daarbij horende keuze van spaken, aantal spaken, nippels, spaakpatroon, spaakspanning, gewicht, budget
Wat betekent: IS, Centerlock, BOOST, Hooked, Hookless, Ai, Straight Pull, J-bend, Laterale stijfheid, Ratchet, Trailing spoke, TPI, 15G?
Theorie en praktijk achter spaakpatronen en of combinaties
Wat is de verhouding tussen spaakspanningen links en rechts, wat kan je er aan doen, wat is beter?
Offset velgen, wat is het en is het beter of niet?
Waarom worden naven en velgen altijd maar breder?
Waarom straight pull of J-bend naven en spaken?
Waarom deze spaaknippels, welke lengte?
Welk materiaal?
Stap 2 Berekenen
Hoe spaken berekenen, welke gebruiken
Hoe simpel is het om een naaf op te meten, hoe nauwkeurig moet je zijn?
Wat met straight pull berekenen?
Stap 3 Spaken op maat
Spaken selecteren en bijkomend op lengte maken met onze Morizumi spoke cutting and threading (SCT) machine
Oliën?
Spaken rekken, welke spaken rekken?
Spaak rondellen?
Wanneer welke spaakrondellen gebruiken?
Vet of olie of andere preparaten gebruiken?
Stap 4 Opspaken
Hoe een wiel opspaken, hoe begin ik er aan?
Welke spaak eerst?
Hoe kruis je?
Voor of achter kruisen?
Stap 5 Op spanning brengen en rond zetten
Hoe initieel op spanning brengen van een wiel?
Hoe vanaf het begin zien of de spaken OK zijn of dat er een fout is gebeurd?
Waarom gebruik ik geen micrometers op de wielstandaard?
Waarom gebruik ik een gemodificeerde wielstandaard?
Stap 6 Kalibratie spaakspanningsmeter
Hoe spaken kalibreren?
Welke spaakspanningsmeters?
Waarom is de ene spaakspanningsmeters beter dan de andere?
Hoe controleren op geluid?
Wat met platte spaken zoals CX-Ray?
Hoe veel wijkt een spaakspanningsmeter nu af? 1%, 5% 10% 15%?
Spaken kneden en stress wegnemen, hoe doe je dat?
Hoeveel keer moet je het doen?
Hoe zorg ik ervoor dat spaken niet verdraaien, vooral wanneer het bijna op spanning komt?
Welke tools gebruik ik?
Staat het wiel in het midden?
Hoe meet je het en wat zegt de tool?
Wat met Ai (Asymmetric Integration) of off center bouwen van wielen?
Stap 7 Controle metingen
Welk controleprogramma gebruik ik?
Wat is de gemiddelde waarde?
Maxima en minima?
Wat mag en hoeveel?
Wat is de ideale spaakspanning?
Wat met overspannen van wielen?
Wanneer niet meer corrigeren?
Wat met compromissen maken bij bepaalde materialen?
Stap 8 Afwerken en tubeless dichtmaken
Hoe spaken vastzetten, welke manieren zijn er?
Is er nog correctie mogelijk/nodig? Waarom velgen reinigen?
Hoe Tubeless dichtmaken van een wiel? Hoeveel keer gaan we rond met tape?
Hoe aanbrengen?
Welke tapes en diktes?
Wat met racewielen?
Welke ventielen?
Hoe worden gaten gemaakt voor ventielen?
Hoe een sticker en serienummer aanbrengen?
Stap 9 Extra
Hoe banden leggen?
Hoe voorkom ik oorschade?
Ooit al eens een band over een rand horen ploffen?
Hoe leg ik een rim strip?
Welk middel gebruik ik?
Referentie : EB8839
Merk : ENDURO
Gewicht : 0gr.
Materiaal : STEEL STAINLESS
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
S6902 LLB - Stainless Steel Radial Bearing (C3 Clearance) - 15mm x 28mm x 7mm This radial bearing features 440C stainless steel alloy races and Grade 10 balls with dual - seals and 90% fill with Mobil XHP 222 high pressure water proof grease to withstand daily abuse of use and the elements. Radial bearing generally used as a hub bearing and can be used as a pivot bearing, though the MAX - type version of this bearing is better suited for suspension use. . Not all stainless steel is created equal. Enduro only uses 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. 440C has the highest strength, hardness, and wear resistance of all the standard 440 - series stainless alloys with high carbon content. As expected, it is also the most expensive of the 440 series alloys and requires multiple rounds of heat treatment and cryogenic treatment to achieve its superior mechanical properties. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash your bike often, or where sweat can be a problem. Enduro stainless bearings all carry a full two year anti - corrosion warranty. The Enduro line of bearings are available in high - carbon chromium steel, 440C stainless steel, ceramic - hybrid and XD15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual - lip seals that ride in a micro - groove creating a full labyrinth to provide superior protection against the elements.
Referentie : NA.FW.0199
Merk : FUNWORKS
Gewicht : 145gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
FUN WORKS N-LIGHT ONE IS DISC FRONT HUB 6-BOLT
Weight Weenies will have a lot of joy with this noble piece!
A Smart Construction and superlight high quality components are making the Fun Works N-Light One to the perfect Lightweight hub for Cross Country,Trail and All Mountain usage.
Model: N-Light One front hub
Hole Count: 32
Weight: 140 Gramm
Disc Mount: IS (6-bolt)
Specials
2 Sealed cartridge bearings
forged and CNC machined hub body
LipLock Seal End Caps
convertible to 5x100mm QR, 9x100mm TB, 12x100mm TA and 15x100mm TA
laser etched logos
Use for : Cross Country,Trail,All Mountain,Enduro
Type: Front Wheel
Hub-Type: Standard
Brake interface: Disc IS (6-bolt)
Weight g: 140
Related links to Fun Works N-Light One IS disc Front Hub 6-Bolt
Referentie : SRDTCO50296B
Merk : DT SWISS
Gewicht : 6.5gr.
Materiaal : STEEL STAINLESS
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
PRODUCT DETAILS
This is one of the most versatile spokes in the DT Swiss spoke range. DT Competition gets its special strength from cold forging. This makes it not only extremely durable but thanks to the thinner middle section, it is 48 g lighter than a spoke with a constant diameter of 1.8 mm. The balanced relation between strength and weight of its 2.0 mm counterpart allows for a wide range of uses, from road wheels to super-light Enduro MTB wheels. Weight: from 311 g for 64 spokes at a length of 264 mm.
PRODUCT TYPE J-bend, Straightpull
BLADING None
REDUCTION Double butted Technologies
Wij maken spaken op gewenste lengte!
Referentie : Gravel 25 LightB Acces Hole LightB
Merk : WHEELSTUFF
Gewicht : 450gr.
Materiaal : CARBON
Spaakgaten : 32
Remtype : DISC
Kleur : UD SATIN FINISH
Velgbreedte : 25,0 32,4 35,0 OS 2,0
Naaftype :
WITH Access Holes = Rim Tape needed!
With Drain Holes
Spokes 32H!!
Material: Toray T700 & T800 Premium Carbon Fiber
Size: 29”/700C (ETRTO 622mm)
Intended Use: CX/Gravel
Bead Type: Clincher
Tubeless Capable: Yes
Inner/Outer Width: 25mm/32mm
Depth: 35mm
ERD: 569mm (not including nipple head dimension)
Rim Weight: 460
Profile: Asymmetric (2mm)
Max Cyclist Weight (on flat ground): Standard 135kg
Max Tire Pressure (with 28C): Hook: 80psi/ 5.52bar
Recommended Tire Width: 28C-50C
Extra wrapped with foil and LOGO
Referentie : Gravel 25 LightB NO Acces Hole LightB
Merk : WHEELSTUFF
Gewicht : 460gr.
Materiaal : CARBON
Spaakgaten : 32
Remtype : DISC
Kleur : UD SATIN FINISH
Velgbreedte : 25,0 32,4 35,0 OS 2,0
Naaftype :
No Access Holes = NO rim Tape needed!
With Drain Holes
Spokes 32H!!
Material: Toray T700 & T800 Premium Carbon Fiber
Size: 29”/700C (ETRTO 622mm)
Intended Use: CX/Gravel
Bead Type: Clincher
Tubeless Capable: Yes
Inner/Outer Width: 25mm/32mm
Depth: 35mm
ERD: 569mm (not including nipple head dimension)
Rim Weight: 460
Profile: Asymmetric (2mm)
Max Cyclist Weight (on flat ground): Standard 135kg
Max Tire Pressure (with 28C): Hook: 80psi/ 5.52bar
Recommended Tire Width: 28C-50C
Referentie : LB057
Merk : FUNWORKS
Gewicht : 136gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
FUN WORKS N-LIGHT ONE CL DISC FRONT HUB CENTERLOCK
Weight Weenies will have a lot of joy with this noble piece!
A Smart Construction and superlight high quality components are making the Fun Works N-Light One to the perfect Lightweight hub for Cross Country,Trail and All Mountain usage.
Model: N-Light One front hub
Hole Count: 32
Weight: 130 Gramm
Disc Mount: Centerlock
Specials
2 Sealed cartridge bearings
forged and CNC machined hub body
LipLock Seal End Caps
convertible to 5x100mm QR, 9x100mm TB, 12x100mm TA and 15x100mm TA
laser etched logos
Use for : Cross Country,Trail,All Mountain,Enduro
Type: Front Wheel
Hub-Type: Standard
Brake interface: Centerlock
Weight g: 130
Related links to Fun Works N-Light One CL disc Front Hub Centerlock
Referentie : LB048
Merk : FUNWORKS
Gewicht : 262gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 142 TA
FUN WORKS N-LIGHT ONE IS DISC REAR HUB 6-BOLT
The successor of the popular N-Light Evo hub
Fun Works has implemented numerous improvements on their new N-Light One hub.
The hub have been equipped with larger bearings to increase durability.In the new Freehub are working 4 simultaneously engaging pawls with a 48 teeth Ratchet Ring.The result is a 37,5% quicker engagement of the pawls (compared to the previous model N-Light Evo) and thus faster acceleration and more control in demanding terrain.The hub shell is forged and CNC machined for maximum durability furthermore a high durometer main seal is integrated into hub shell.The end caps with LipLock Seal Technology are protecting the bearings more effective and locks the caps into place.The N-Light One hub is still easy to convert to different axles standards without special tools.You just have to swap the end caps.Shimano standard compatible freehubs will be supplied ready to take 11speed Road or MTB cassettes.A spacer for 8/9/10speed Road or MTB Cassettes and for 11speed MTB Cassettes is included to each hub.
Model: N-Light One rear hub
Hole Count: 32
Weight: 260 Gramm
Disc Mount: IS (6-bolt)
Specials
4 Sealed cartridge bearings
Pawl System
4 Pawls
48teeth Ratchet Ring (with 7,5 degrees of engagement)
forged and CNC machined hub body
Integrated Durometer Seal
LipLock Seal End Caps
convertible to 5x135mm QR,10x135mm TB, 12x135mm TA und 12x142mm TA
laser etched logos
Use for : Cross Country,Trail,All Mountain,Enduro
Type: Rear Wheel
Hub-Type: Standard
Brake interface: Disc IS (6-bolt)
Weight g: 260
Related links to Fun Works N-Light One IS disc Rear Hub 6-Bolt
Referentie : #90738
Merk : NEWMEN
Gewicht : 400gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK GRAY
Velgbreedte : 25,0 28,25 19,5 OS 0
Naaftype :
Model Family
Evolution SL
Inner Width
25 mm
Intended use
Cross Country
Material
6069 Aluminium
Rim Profile
hookless tubeless ready
Max. System Weight
130kg
Spoke Hole Number
28h
Washer Required
yes
Weight
380g / 400g
Eyelets
no
ERD
27,5" / 29"
Technical information / description
High-end aluminium rim. Due to the high dent resistance achieved by our flared rim flanges it is ideally suited for modern aggressive trail bikes while still being light enough for XC/marathon riders.
Documents
Referentie : 90592
Merk : NEWMEN
Gewicht : 175gr.
Materiaal : ALUMINUM 7075
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 20 X 110 TA
Dit is een 20 X 110 naaf maar geen BOOST
Remschijf 15.5mm bij 20 X 110
https://www.notubes.com/stories/say-what-the-difference-between-20x110mm-thru-axles-and-20x110mm-boost-thru-axles-explained
Bij BOOST staat de remschijf bevestiging verder naar buiten
10.5mm bij 20 X 110 BOOST
Referentie : ERASE MTB REAR HUB
Merk : ERASE
Gewicht : 236gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
This is a V1 hub!!
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs get a 100x12 axle.
The rear hubs get a 142x12 axle.
Weight
Front : 120gr
Rear : 207gr
Spoke holes
24 or 28 holes.
J-Bend spokes or Berd spokes compatible.
Titanium freehub
We use Grade 5 titanium to make the freewheel. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (36 engagement points)
The ratchet technology is the more reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
Te hub geometry is a very important aspect of a hub design. It defines the spokes lenght but more importanly the wheel lateral rigidity. Further is the flange from the hub center, higher is the lateral stiffness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open hubs by hand just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are still searching an european company able to produce it)
Anodizing process : In-house
Price
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, bearings and improper assembly or maintenance by an unauthorized dealer.
Only for the initial owner.
Referentie : TA32B6B
Merk : TRAILMECH
Gewicht : 168gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 15 X 110 TA BOOST
Dit is een heel speciale naaf uit Oekraïne!
Ik was heel enthousiast over de opbouw en hoe de naaf met kennis gemaakt is.
Er waren echter 2 problemen waarvoor ik voorlopig niet kan verder doen met Trailmech, nl de oorlog en de daarbij horende mogelijks niet beschikbare onderdelen.
Dit is de luidste naaf op de planeet!
De conische vertanding grijpt steeds sterker aan met de kracht die je uitoefent!
Design & Innovation Award 2020
With its Enduro Boost hub, Ukranian manufacturer Trailmech combines an innovative helical freehub engagement mechanism with high-quality workmanship, good performance and a very attractive price point. Whilst most hubs use straight pawls in the freewheel and hub, the Trailmech Enduro Boost System relies on two inter-locking rings with helically cut rings at an angle of 7.2°.
Wordt enkel als set verkocht samen met ref 3970
Referentie : TA32XDB6B
Merk : TRAILMECH
Gewicht : 286gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Dit is een heel speciale naaf uit Oekraïne!
Ik was heel enthousiast over de opbouw en hoe de naaf met kennis gemaakt is.
Er waren echter 2 problemen waarvoor ik voorlopig niet kan verder doen met Trailmech, nl de oorlog en de daarbij horende mogelijks niet beschikbare onderdelen.
Dit is de luidste naaf op de planeet!
De conische vertanding grijpt steeds sterker aan met de kracht die je uitoefent!
Design & Innovation Award 2020
With its Enduro Boost hub, Ukranian manufacturer Trailmech combines an innovative helical freehub engagement mechanism with high-quality workmanship, good performance and a very attractive price point. Whilst most hubs use straight pawls in the freewheel and hub, the Trailmech Enduro Boost System relies on two inter-locking rings with helically cut rings at an angle of 7.2°.
Referentie : ROSWICATAONE160IS
Merk : SWISSSTOP
Gewicht : 116gr.
Materiaal : STEEL STAINLESS
Spaakgaten : Geen info
Remtype : IS (6-BOLT)
Kleur : SILVER
Velgbreedte :
Naaftype :
Catalyst One | Simply Powerful Braking
description
the tested and proven Catalyst brake ring
140 | 160 | 180 | 203 | 220 mm sizes
Centerlock and 6-bolt
6-bolt can be used with adapter for Centerlock hubs
140 and 160 mm are UCI approved
Referentie : ROSWIHRDE
Merk : SWISSSTOP
Gewicht : 0gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
Disc 32 E
PN:P100005157EAN:7640121223242
PRODUCT DETAILS
MODEL
COMPOUND
Disc 32Disc E
FITS
SRAM
Brake Calipers
Red eTap AXS (Gen. 1 'Mono-Bloc' caliper),eTap HRD,Red 22 HRD (B1)
Force Force 22 HRD (B1),Force 1 HRD
Rival Rival 22 HRD (B1),Rival 1 HRD
Apex Apex 1 HRD
S-700 HRD (B1)
Level Ultimate,TLM (2016-2019)
CHARACTERISTICS
long lasting, high endurance pad compound
very easy modulation of braking force
high temperature stability for consistent brake power
organic formula is low noise and rotor friendly
PERFORMANCE
0 (WORST) - 10 (BEST)
Initial Bite: 7
Modulation: 9
Longevity: 9
Heat Tolerance: 9
Noise Dry: 9
Noise Wet: 7
Referentie : ROSWICATAONE180IS
Merk : SWISSSTOP
Gewicht : 152gr.
Materiaal : STEEL STAINLESS
Spaakgaten : Geen info
Remtype : IS (6-BOLT)
Kleur : SILVER
Velgbreedte :
Naaftype :
Catalyst One | Simply Powerful Braking
description
the tested and proven Catalyst brake ring
140 | 160 | 180 | 203 | 220 mm sizes
Centerlock and 6-bolt
6-bolt can be used with adapter for Centerlock hubs
140 and 160 mm are UCI approved
Referentie : ERASE MTB FRONT HUB ISO V2 28
Merk : ERASE
Gewicht : 126gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 15 X 110 TA BOOST
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs are available in 110x15 (Boost) and 110x20 (DH).
The rear hubs are available in 148x12 (Boost) and 157x12 (Superboost).
Weight
Front : from 144gr
Rear : from 243gr
Spoke holes
28 or 32 spoke holes.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
We only use big bearings on our MTB hubs so they may last as long as your wheels.
Front Boost : 2x 6903
Front DH : 2x 6805
Rear Sram XD : 4x 6902
Rear Shimano Microspline : 3x 6902 + 1x 6802
Titanium freehub
We use Grade 5 titanium to make the freehub. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (60 engagement points)
The Ratchet Technology is one of the most reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
The hub geometry is a very important aspect of a hub design. It defines the spokes length, but more importantly the wheel lateral stiffness. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open our hubs by hand, just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are searching an european company able to produce it)
Anodizing process : In-house
Prices
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, improper assembly or maintenance by an unauthorized dealer.
- The warranty does not cover bearings.
Only for the initial owner.
ERASE MTB IS-6 holes Hubs
Made from 7075T6 aerospace aluminium, our mtb hubs ally strenght, reliability, easy servicing, great geometry, long life bearings and have an everlasting titanium freehub with a 6 degrees engagement.
- Titanium freehub
- 60 engagement points
- From 387 g / pair
LIFETIME Warranty
Referentie : ERASE MTB REAR HUB ISO V2 32
Merk : ERASE
Gewicht : 232gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs are available in 110x15 (Boost) and 110x20 (DH).
The rear hubs are available in 148x12 (Boost) and 157x12 (Superboost).
Weight
Front : from 144gr
Rear : from 243gr
Spoke holes
28 or 32 spoke holes.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
We only use big bearings on our MTB hubs so they may last as long as your wheels.
Front Boost : 2x 6903
Front DH : 2x 6805
Rear Sram XD : 4x 6902
Rear Shimano Microspline : 3x 6902 + 1x 6802
Titanium freehub
We use Grade 5 titanium to make the freehub. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (60 engagement points)
The Ratchet Technology is one of the most reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
The hub geometry is a very important aspect of a hub design. It defines the spokes length, but more importantly the wheel lateral stiffness. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open our hubs by hand, just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are searching an european company able to produce it)
Anodizing process : In-house
Prices
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, improper assembly or maintenance by an unauthorized dealer.
- The warranty does not cover bearings.
Only for the initial owner.
ERASE MTB IS-6 holes Hubs
Made from 7075T6 aerospace aluminium, our mtb hubs ally strenght, reliability, easy servicing, great geometry, long life bearings and have an everlasting titanium freehub with a 6 degrees engagement.
- Titanium freehub
- 60 engagement points
- From 387 g / pair
LIFETIME Warranty
Referentie : 33 973-00 28B
Merk : SOUL_KOZAK
Gewicht : 230gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Voor de liefhebber van iets exclusief!
https://soul-kozak.com/
Dit zijn speciale en lichte naven uit Polen.
Ik ken Mariusz Kozak al heel lang en hij maakt enorm mooie dingen in eigen beheer.
Het bijzondere is dat er geen veer in het ratchet systeem zit maar een magneet die de verbinding maakt.
Deze naven zijn gepersonaliseerd met on Wheelstuff logo.
Innovatief en gepatenteerd M-Netic-systeem
Al onze achternaven zijn voorzien van het gepatenteerde en daardoor unieke M-netic eenrichtingskoppelingssysteem. Het M-netic-systeem is een revolutionair koppelingssysteem voor de achternaaf, bestaande uit ringmagneten die de tandwielring van de koppeling gelijkmatig tegen het koppelingslichaam drukken. Hierdoor zijn onze hubs duidelijk hoorbaar en herkenbaar.
Referentie : PTNREVO29ML
Merk : PTN
Gewicht : 109gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
Productomschrijving
Video
R-Evolution, de revolutie van de evolutie! De R-Evolution van Pepi's Tire Noodle is een revolutionaire insert ontwikkeld met de hulp van de beste mountainbikers ter wereld. Een unieke lichtgewicht structuur van dit type optimaliseert de werking van tubeless set-ups, verhoogt de rijprecisie, beschermt de velgen en maakt het zelfs mogelijk om met en platte band te rijden. Raadpleeg de maattabel om te zien welke maat bij u past.
Details:
Lichtgewicht schuim met gesloten cellen.
Gemakkelijk te installeren en te verwijderen.
Anti-pinch velg bescherming.
Perfecte bandendemping, minder trillingen.
Verminderde rolweerstand.
Hoogste stuurprecisie.
Geen zijdelingse beweging van de banden.
Compatibel met alle tire sealants.
Inhoud van de kit:
2x PTN R-Evolution inzetstukken.
2x ULFT Ultralight tubeless ventielen.
Multifunctionele stoffen tas.
Stickers voor frame en velg.
Instructies
Referentie : PTNREVO275ML
Merk : PTN
Gewicht : 109gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
Productomschrijving
Video
R-Evolution, de revolutie van de evolutie! De R-Evolution van Pepi's Tire Noodle is een revolutionaire insert ontwikkeld met de hulp van de beste mountainbikers ter wereld. Een unieke lichtgewicht structuur van dit type optimaliseert de werking van tubeless set-ups, verhoogt de rijprecisie, beschermt de velgen en maakt het zelfs mogelijk om met en platte band te rijden. Raadpleeg de maattabel om te zien welke maat bij u past.
Details:
Lichtgewicht schuim met gesloten cellen.
Gemakkelijk te installeren en te verwijderen.
Anti-pinch velg bescherming.
Perfecte bandendemping, minder trillingen.
Verminderde rolweerstand.
Hoogste stuurprecisie.
Geen zijdelingse beweging van de banden.
Compatibel met alle tire sealants.
Inhoud van de kit:
2x PTN R-Evolution inzetstukken.
2x ULFT Ultralight tubeless ventielen.
Multifunctionele stoffen tas.
Stickers voor frame en velg.
Instructies
Referentie : SPAKEN OP MAAT 14G / 15G
Merk : WERK
Gewicht : 0gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
The Morizumi spoke cutting and threading (SCT) machine comes complete, over 600 are in worldwide use, and they crank out thousands of custom length spokes each day.
Morizumi Masakazu—designed by a perfectionist with a career of spoke manufacturing experience. Mr Morizumi learned his trade at Asahi Spoke in Japan (partner of Wheelsmith for 25yrs). The design offers features not available in other machines (no others were designed by a spoke maker)—created for high output and compact for a workshop. Users enjoy near 100% satisfaction, exceptional quality, and superb finish.
Referentie : RHRS4CL24PU142XDR
Merk : HOPE
Gewicht : 268gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : PURPLE
Velgbreedte :
Naaftype : 12 X 142 TA
Incredibly versatile and easily serviceable hub with a proven reputation for bullet proof quality time and time again. The 6 anodized colors throughout the range give the ultimate in bike customization.
Key Features
Sealed stainless Steel cartridge bearings throughout
Hub shell machined from a single forged aluminum billet
Standard 6 bolt disc fitting
Larger spoke flange to enable stiffer wheel builds
Unsurpassed reliability
Available in QR, 9mm, 12mm, 15mm and 20mm
Referentie : RHRS4CL24C142XDR
Merk : HOPE
Gewicht : 268gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : ORANGE
Velgbreedte :
Naaftype : 12 X 142 TA
Incredibly versatile and easily serviceable hub with a proven reputation for bullet proof quality time and time again. The 6 anodized colors throughout the range give the ultimate in bike customization.
Key Features
Sealed stainless Steel cartridge bearings throughout
Hub shell machined from a single forged aluminum billet
Standard 6 bolt disc fitting
Larger spoke flange to enable stiffer wheel builds
Unsurpassed reliability
Available in QR, 9mm, 12mm, 15mm and 20mm
Referentie : XHSPCLX1224
Merk : CARBON_TI
Gewicht : 181gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : ALL COLOR
Velgbreedte :
Naaftype : 12 X 142 TA
Key features:
X-Hub SP Center Lock QR12 24
Superlight straight pull Center Lock QR12 thru axle front hub.
24 holes oversized AL7075-T6 CNC machined body, center lock rotor mounting system licensed by Shimano and compatible with 15/20 mm thru axle only lockring (e.g. Shimano SM-HB20), Hi-performance sealed bearings with external preload system.
Several anodized colours available.
100% Made in Italy.
Referentie : XHSPCLQR1224
Merk : CARBON_TI
Gewicht : 89gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : ALL COLOR
Velgbreedte : 20,0
Naaftype : 12 X 100 TA
Key features:
X-Hub SP Center Lock QR12 24
Superlight straight pull Center Lock QR12 thru axle front hub.
24 holes oversized AL7075-T6 CNC machined body, center lock rotor mounting system licensed by Shimano and compatible with 15/20 mm thru axle only lockring (e.g. Shimano SM-HB20), Hi-performance sealed bearings with external preload system.
Several anodized colours available.
100% Made in Italy.
Referentie : VIDUVE78\
VIDUVE74
Merk : DUKE
Gewicht : 470gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK
Velgbreedte : 19,5 23,0 30,0 OS 2,0
Naaftype :
DUKE ROAD RUNNER 30 disc ARTISANAL RIM
The DUKE Road runner 30 disc rim is designed, tested in France, DUKE is the exclusive owner of the manufacturing tools. The DUKE Road Rim Runner 30 disc Has a profile height of 30mm. Symmetrical front profile and ASYMMETRIC at the rear: As the number of gears increases, The cassette-side flange of the hub is increasingly "pushed" towards the inside of the wheel have an asymetrical profil (2mm offset) Which makes it possible to increase the lateral stiffness of the wheel without gaining weight. The holes in the rim are off-centered, this makes it possible to close more the umbrella formed by the Spokes. Thus the spokes ensure a better maintenance of the rim and the lateral stiffness of the wheel is increased. Inner width 19,5mm. This gives more volume to the tires and improves efficiency, comfort and cornering grip. A wide rim also means that you can use finer, lighter tires while maintaining the comfort, softness and grip provided by a larger volume of air.
DATA SHEET
RIM MATERIAL
ALU
RIM PROFILE
ASYMMETRICAL
INSIDE WIDTH (MM)
19.5
TYPE OF BRAKING
DISC
MAX STRAIN (N)
1100.0
PRACTICE TYPE
GRAVEL BIKE
ROAD
TRIATHLON&CLM
NIPPLE POSITION
EXTERNAL
NIPPLE HEIGHT (MM)
14.0
REINFORCED RIM
NO
TYPE OF TYRE
CLINCHER
TUBELESS
POSITION
FRONT
REAR
VALVE HEIGHT (MM)
44
TAPE WIDTH (MM)
22.0
MAX PRESSURE (BAR)
6.5B WITH 28MM TYRE
ERD JANTE(S)
RR30 : 581
SYSTEM MAX WEIGHT (KG)
120
RIM HEIGHT (MM)
30
ETRTO (MM)
622.0
RIM OFFSET (MM)
2.0
Referentie : FG.FW.0027
Merk : FUNWORKS
Gewicht : 435gr.
Materiaal : ALUMINUM NEW ERA
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK
Velgbreedte : 18,0 22,0 23,5 OS 0
Naaftype :
FUN WORKS UNIVERSE 18 RB RIM 700C BLACK 28H
The modern aluminium rim for competition cyclists, climbers and weight watchers.
The Universe 18 is superfast rim, but at the same time, offering stiffness and an internal bead width of 18mm.
This will give a tyre stiffer side walls on a descent and an optimized rounded profile for better cornering.The low weight lets you climb mountains easily and the large CNC machined braking surface gives you safety on the steepest descents.
The rim is made of high-strength New Era Alloy wich makes this rim despite the incredible low weight extremly stiff.The tubeless ready design allows an easy tubeless setup and ensures the perfect fit of the tire.
Details:
Hole Count 28
Weight 435 Gramm
Use for Road Bike (Rim Brake)
Material New Era Aluminium
max. spoke tension: 1200N
max. air pressure: 8bar
ETRTO: 622x18
ERD: 593
tire pressure 25mm : 8bar (116psi)
tire pressure 30mm : 6.9bar (100psi)
Specials:
Sandblast Finish
Rim Width 22mm outside 18mm inside
Max System Weight: 110KG
recommend Tape width: 21mm
Size: 28
Brake interface: Rim Brake
Field of application: Road Bike
Weight g: 435
Inner width : 18mm
Max System Weight kg: 110
Colour: Black
Related links to Fun Works Universe 18 RB Rim 700c black 28H
Referentie : #90587
Merk : NEWMEN
Gewicht : 540gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK GRAY
Velgbreedte : 30,0 33,8 20,0 OS 0 ERD 596
Naaftype :
Wij gebruiken enkel de SL versie.
Product details
"Super durable rim, engineered to withstand the thoughest Enduro and DH riding. Based on our lightweight and durable NEWMEN Evolution SL rims, we have reinforced the profile even further resulting in the Evolution E.G. rims being extremely resistant against dents. In fact they are 40% more durable than the SL A.30. As with our regular rims, the profile is completly round and the flared flanges keep the tyre rounder on top of making the rims so hard-wearing against dents and deformation. Materials are deployed precisely at critical points and shaved off elsewhere. The flat spoke bed is designed to work with our special washers for extremely high spoke tension values whilst keeping the amount of material used down to a minimum. In contrast, the flanges are substantially thicker than on other rims in the same weight class for added strength and durability. In combination with our Newmen Evolution SL hubs and Sapim Race (2,0-1,8-2,0) spokes it is possible to build a durable and lightweight gravity wheelset. "
colour
black/grey
size
584x30
material
alloy
weight
0,55
Referentie : 12 851-00 28B
Merk : SOUL_KOZAK
Gewicht : 115gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 15 X 110 TA BOOST
Voor de liefhebber van iets exclusief!
https://soul-kozak.com/
Dit zijn speciale en lichte naven uit Polen.
Ik ken Mariusz Kozak al heel lang en hij maakt enorm mooie dingen in eigen beheer.
Het bijzondere is dat er geen veer in het ratchet systeem zit maar een magneet die de verbinding maakt.
Deze naven zijn gepersonaliseerd met on Wheelstuff logo.
Innovatief en gepatenteerd M-Netic-systeem
Al onze achternaven zijn voorzien van het gepatenteerde en daardoor unieke M-netic eenrichtingskoppelingssysteem. Het M-netic-systeem is een revolutionair koppelingssysteem voor de achternaaf, bestaande uit ringmagneten die de tandwielring van de koppeling gelijkmatig tegen het koppelingslichaam drukken. Hierdoor zijn onze hubs duidelijk hoorbaar en herkenbaar.
Wordt enkel verkocht als set met ref 4249
Referentie : VIDUVE77\
VIDUVE77
Merk : DUKE
Gewicht : 470gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : DISC
Kleur : BLACK
Velgbreedte : 19,5 23,0 30,0 OS 2,0
Naaftype :
DUKE ROAD RUNNER 30 disc ARTISANAL RIM
The DUKE Road runner 30 disc rim is designed, tested in France, DUKE is the exclusive owner of the manufacturing tools. The DUKE Road Rim Runner 30 disc Has a profile height of 30mm. Symmetrical front profile and ASYMMETRIC at the rear: As the number of gears increases, The cassette-side flange of the hub is increasingly "pushed" towards the inside of the wheel have an asymetrical profil (2mm offset) Which makes it possible to increase the lateral stiffness of the wheel without gaining weight. The holes in the rim are off-centered, this makes it possible to close more the umbrella formed by the Spokes. Thus the spokes ensure a better maintenance of the rim and the lateral stiffness of the wheel is increased. Inner width 19,5mm. This gives more volume to the tires and improves efficiency, comfort and cornering grip. A wide rim also means that you can use finer, lighter tires while maintaining the comfort, softness and grip provided by a larger volume of air.
DATA SHEET
RIM MATERIAL
ALU
RIM PROFILE
ASYMMETRICAL
INSIDE WIDTH (MM)
19.5
TYPE OF BRAKING
DISC
MAX STRAIN (N)
1100.0
PRACTICE TYPE
GRAVEL BIKE
ROAD
TRIATHLON&CLM
NIPPLE POSITION
EXTERNAL
NIPPLE HEIGHT (MM)
14.0
REINFORCED RIM
NO
TYPE OF TYRE
CLINCHER
TUBELESS
POSITION
FRONT
REAR
VALVE HEIGHT (MM)
44
TAPE WIDTH (MM)
22.0
MAX PRESSURE (BAR)
6.5B WITH 28MM TYRE
ERD JANTE(S)
RR30 : 581
SYSTEM MAX WEIGHT (KG)
120
RIM HEIGHT (MM)
30
ETRTO (MM)
622.0
RIM OFFSET (MM)
2.0
Referentie : RHP432N157SBMS
Merk : HOPE
Gewicht : 316gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 157 TA SUPER BOOST PLUS
Dit is een SUPERBOOST NAAF!
Incredibly versatile and easily serviceable hub with a proven reputation for bullet proof quality time and time again. The 6 anodized colors throughout the range give the ultimate in bike customization.
Key Features
10, 11 and 12 speed compatible
Sealed stainless Steel cartridge bearings throughout
Hub shell machined from a single forged aluminum billet
Standard 6 bolt disc fitting
4 Pawl ratchet system with 44 tooth engagement (8.2 deg)
Larger spoke flange to enable stiffer wheel builds
Unsurpassed reliability
Available in 135mm and 142mm and 148mm widths
Referentie : V2 ERASE ROAD FRONT HUB 28 V2 B
Merk : ERASE
Gewicht : 120gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs get a 100x12 axle.
The rear hubs get a 142x12 axle.
Weight
Front : 120gr
Rear : 207gr
Spoke holes
24 or 28 holes.
J-Bend spokes or Berd spokes compatible.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
Front : 2x 6902
Rear : 4x 6902
Titanium freehub
We use Grade 5 titanium to make the freewheel. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (36 engagement points)
The ratchet technology is the more reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
Te hub geometry is a very important aspect of a hub design. It defines the spokes lenght but more importanly the wheel lateral rigidity. Further is the flange from the hub center, higher is the lateral stiffness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open hubs by hand just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are still searching an european company able to produce it)
Anodizing process : In-house
Price
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, bearings and improper assembly or maintenance by an unauthorized dealer.
Only for the initial owner.
Referentie : RHP432C142TSA
Merk : HOPE
Gewicht : 300gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : ORANGE
Velgbreedte :
Naaftype : 12 X 142 TA
Incredibly versatile and easily serviceable hub with a proven reputation for bullet proof quality time and time again. The 6 anodized colors throughout the range give the ultimate in bike customization.
Key Features
10, 11 and 12 speed compatible
Sealed stainless Steel cartridge bearings throughout
Hub shell machined from a single forged aluminum billet
Standard 6 bolt disc fitting
4 Pawl ratchet system with 44 tooth engagement (8.2 deg)
Larger spoke flange to enable stiffer wheel builds
Unsurpassed reliability
Available in 135mm and 142mm and 148mm widths
Referentie : FHP432C12
Merk : HOPE
Gewicht : 182gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : ORANGE
Velgbreedte :
Naaftype : 12 X 100 TA
Incredibly versatile and easily serviceable hub with a proven reputation for bullet proof quality time and time again. The 6 anodized colors throughout the range give the ultimate in bike customization.
Key Features
Sealed stainless Steel cartridge bearings throughout
Hub shell machined from a single forged aluminum billet
Standard 6 bolt disc fitting
Larger spoke flange to enable stiffer wheel builds
Unsurpassed reliability
Available in QR, 9mm, 12mm, 15mm and 20mm
Referentie : ROSWICATAONE160CL
Merk : SWISSSTOP
Gewicht : 164gr.
Materiaal : STEEL STAINLESS
Spaakgaten : Geen info
Remtype : CENTERLOCK
Kleur : SILVER
Velgbreedte :
Naaftype :
Catalyst One | Simply Powerful Braking
description
the tested and proven Catalyst brake ring
140 | 160 | 180 | 203 | 220 mm sizes
Centerlock and 6-bolt
6-bolt can be used with adapter for Centerlock hubs
140 and 160 mm are UCI approved
Referentie : 180277207 16*6
Merk : RYDE
Gewicht : 0gr.
Materiaal : POLYPROPYLEEN
Spaakgaten : Geen info
Remtype :
Kleur : BLUE
Velgbreedte :
Naaftype :
66 meter op een rol en 19mm breedte
Wat kan je daarmee?
Daar kan je heelwat mee als je de methode gebruikt die ik al heel lang toepas.
Door overlap kan je 30mm foutloos overbruggen en kan je zelfs het tubeless kanaal beter afdichten.
Lees ook eens op https://www.thewheelstuff.be/bike-blog/tubeless-rijden-en-tubeless-maken/
It us a medium strength stretchable polypropylene fixing tape with a special natural rubber adhesive.
It is a specially designed tape that does not leave stains or glue.
Color Light blue
Length 66 m
Width 19 mm
Species 64284
Backing material MOPP
Purpose Protection during transport
Type of adhesive Natural rubber
Elongation at break 35%
Tensile strength 300 N/cm
Total thickness 110 µm
Adhesion to steel 4 N/cm
Referentie : ERASE MTB FRONT HUB ISO V2 32
Merk : ERASE
Gewicht : 126gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 15 X 110 TA BOOST
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs are available in 110x15 (Boost) and 110x20 (DH).
The rear hubs are available in 148x12 (Boost) and 157x12 (Superboost).
Weight
Front : from 144gr
Rear : from 243gr
Spoke holes
28 or 32 spoke holes.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
We only use big bearings on our MTB hubs so they may last as long as your wheels.
Front Boost : 2x 6903
Front DH : 2x 6805
Rear Sram XD : 4x 6902
Rear Shimano Microspline : 3x 6902 + 1x 6802
Titanium freehub
We use Grade 5 titanium to make the freehub. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (60 engagement points)
The Ratchet Technology is one of the most reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
The hub geometry is a very important aspect of a hub design. It defines the spokes length, but more importantly the wheel lateral stiffness. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open our hubs by hand, just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are searching an european company able to produce it)
Anodizing process : In-house
Prices
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, improper assembly or maintenance by an unauthorized dealer.
- The warranty does not cover bearings.
Only for the initial owner.
ERASE MTB IS-6 holes Hubs
Made from 7075T6 aerospace aluminium, our mtb hubs ally strenght, reliability, easy servicing, great geometry, long life bearings and have an everlasting titanium freehub with a 6 degrees engagement.
- Titanium freehub
- 60 engagement points
- From 387 g / pair
LIFETIME Warranty
Referentie : FHP432N12
Merk : HOPE
Gewicht : 182gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
Incredibly versatile and easily serviceable hub with a proven reputation for bullet proof quality time and time again. The 6 anodized colors throughout the range give the ultimate in bike customization.
Key Features
Sealed stainless Steel cartridge bearings throughout
Hub shell machined from a single forged aluminum billet
Standard 6 bolt disc fitting
Larger spoke flange to enable stiffer wheel builds
Unsurpassed reliability
Available in QR, 9mm, 12mm, 15mm and 20mm
Referentie : #90523
Merk : NEWMEN
Gewicht : 460gr.
Materiaal : CARBON
Spaakgaten : 28
Remtype :
Kleur : BLACK GRAY
Velgbreedte : 30,0 OS ERD 597
Naaftype :
TECHNICAL INFORMATION / DESCRIPTION
Going full enduro...with carbon fiber? Convinced by the durability of our aluminium rims for enduro use compared to carbon fiber rims, we started developing a 30mm carbon fiber rim initially meant for trailbike use. The result of this project is the NEWMEN Advanced SL A.30 rim with industry leading strength to weight ratio - even strong enough for our EWS riders.
Referentie : ERASE MTB REAR HUB ISO V2 32
Merk : ERASE
Gewicht : 232gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs are available in 110x15 (Boost) and 110x20 (DH).
The rear hubs are available in 148x12 (Boost) and 157x12 (Superboost).
Weight
Front : from 144gr
Rear : from 243gr
Spoke holes
28 or 32 spoke holes.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
We only use big bearings on our MTB hubs so they may last as long as your wheels.
Front Boost : 2x 6903
Front DH : 2x 6805
Rear Sram XD : 4x 6902
Rear Shimano Microspline : 3x 6902 + 1x 6802
Titanium freehub
We use Grade 5 titanium to make the freehub. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (60 engagement points)
The Ratchet Technology is one of the most reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
The hub geometry is a very important aspect of a hub design. It defines the spokes length, but more importantly the wheel lateral stiffness. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open our hubs by hand, just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are searching an european company able to produce it)
Anodizing process : In-house
Prices
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, improper assembly or maintenance by an unauthorized dealer.
- The warranty does not cover bearings.
Only for the initial owner.
ERASE MTB IS-6 holes Hubs
Made from 7075T6 aerospace aluminium, our mtb hubs ally strenght, reliability, easy servicing, great geometry, long life bearings and have an everlasting titanium freehub with a 6 degrees engagement.
- Titanium freehub
- 60 engagement points
- From 387 g / pair
LIFETIME Warranty
Referentie : ERASE MTB REAR HUB 32
Merk : ERASE
Gewicht : 242gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs are available in 110x15 (Boost) and 110x20 (DH).
The rear hubs are available in 148x12 (Boost) and 157x12 (Superboost).
Weight
Front : from 144gr
Rear : from 243gr
Spoke holes
28 or 32 spoke holes.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
We only use big bearings on our MTB hubs so they may last as long as your wheels.
Front Boost : 2x 6903
Front DH : 2x 6805
Rear Sram XD : 4x 6902
Rear Shimano Microspline : 3x 6902 + 1x 6802
Titanium freehub
We use Grade 5 titanium to make the freehub. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (60 engagement points)
The Ratchet Technology is one of the most reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
The hub geometry is a very important aspect of a hub design. It defines the spokes length, but more importantly the wheel lateral stiffness. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open our hubs by hand, just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are searching an european company able to produce it)
Anodizing process : In-house
Prices
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, improper assembly or maintenance by an unauthorized dealer.
- The warranty does not cover bearings.
Only for the initial owner.
ERASE MTB IS-6 holes Hubs
Made from 7075T6 aerospace aluminium, our mtb hubs ally strenght, reliability, easy servicing, great geometry, long life bearings and have an everlasting titanium freehub with a 6 degrees engagement.
- Titanium freehub
- 60 engagement points
- From 387 g / pair
LIFETIME Warranty
Referentie : Luc Scram CB71PTSC6000T test
Merk : PILOT
Gewicht : 9700gr.
Materiaal : TITANIUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : SILVER
Velgbreedte : 25,0 30,0 36,0 OS 2,0
Naaftype : 12 X 100 12 X 142 TA
SCRAM 2e hands testfiets 1 jaar oud in topconditie wegens aankoop nieuwe SCRAM met Smart Shift Pinion
https://www.pilotcycles.com/frame-customize/scram/
The gravel titan
No compromises! The SCRAM is designed for the titans that eat a bowl of gravel for breakfast. We have tried to offer you the best of both worlds by creating a gravel bike that is as fast as a racer and as agile as a MTB. The slightly wider front and rear forks provide space for wider tires, in order to keep control of your bike at any time. The natural damping qualities of titanium add an unparalleled smoothness to your ride. Getting lost in the woods has never felt more enjoyable. The SCRAM is ready for it, so now it’s up to you!
Pilot SCRAM GRX Complete Bike 60
Drivetrain Shimano GRX 800 1x11
Wheelset OHR Cycling G2
Handlebar Ritchey Venturemax UPGRADED to WCS Beacon 31.8 Handlebars 46 cm
Stem Ritchey Comp 4 axis
Seatpost Ritchey Comp Carbon 2-Bolt Zero Offset
Bottom Bracket Shimano BSA
Frame finish Brushed Frame with Sandblasted Logo's
Fork Pilot Forpacker The Pilot Forpacker gravel fork is made for adventure!
Up to 700c x 55mm or 650B x 2,4'
Eyelets for mud guards
Rack mounts
Head light mounts
Internal cable routing for headlight/hub dynamo
Up to 700c x 55mm or 650B x 2,4'
Offset FlipChip
https://www.pilotcycles.com/product/pilot-forpacker-adventure-fork/
Grip Selle Italia Smootape
Saddle SLR Boost TI316 Superflow Titanium Rail
Pedals Shimano XT Pedals
Extra: Fork Pilot Forpacker deze vork kan in 2 modi gezet worden Gravel an Race
Nieuwprijs € 5150,00 met originele NIEUWE wielen OHR Cycling G2 prijs nu € 3350,00
Nieuwprijs € 6126,00 Met Wheelstuff wielen prijs nu € 3695,00
Wheelstuff wielen ref 4861
Carbon rims 25 mm IW
Hole: 24H
Disc Brake
Internal/External Width: 25mm/30mm Depth: 36mm
Asymmetric drilling, 2mm
UD matt finish
14/14 X2/X2
Hookless
Referentie : RHRS4CLSP24C142SA
Merk : HOPE
Gewicht : 272gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : ORANGE
Velgbreedte :
Naaftype : 12 X 142 TA
Incredibly versatile and easily serviceable hub with a proven reputation for bullet proof quality time and time again. The 6 anodized colors throughout the range give the ultimate in bike customization.
Key Features
Sealed stainless Steel cartridge bearings throughout
Hub shell machined from a single forged aluminum billet
Standard 6 bolt disc fitting
Larger spoke flange to enable stiffer wheel builds
Unsurpassed reliability
Available in QR, 9mm, 12mm, 15mm and 20mm
Referentie : ERASE MTB REAR HUB ISO V2 28
Merk : ERASE
Gewicht : 232gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs are available in 110x15 (Boost) and 110x20 (DH).
The rear hubs are available in 148x12 (Boost) and 157x12 (Superboost).
Weight
Front : from 144gr
Rear : from 243gr
Spoke holes
28 or 32 spoke holes.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
We only use big bearings on our MTB hubs so they may last as long as your wheels.
Front Boost : 2x 6903
Front DH : 2x 6805
Rear Sram XD : 4x 6902
Rear Shimano Microspline : 3x 6902 + 1x 6802
Titanium freehub
We use Grade 5 titanium to make the freehub. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (60 engagement points)
The Ratchet Technology is one of the most reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
The hub geometry is a very important aspect of a hub design. It defines the spokes length, but more importantly the wheel lateral stiffness. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open our hubs by hand, just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are searching an european company able to produce it)
Anodizing process : In-house
Prices
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, improper assembly or maintenance by an unauthorized dealer.
- The warranty does not cover bearings.
Only for the initial owner.
ERASE MTB IS-6 holes Hubs
Made from 7075T6 aerospace aluminium, our mtb hubs ally strenght, reliability, easy servicing, great geometry, long life bearings and have an everlasting titanium freehub with a 6 degrees engagement.
- Titanium freehub
- 60 engagement points
- From 387 g / pair
LIFETIME Warranty
Referentie : ERASE MTB REAR HUB ISO V2 32
Merk : ERASE
Gewicht : 244gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs are available in 110x15 (Boost) and 110x20 (DH).
The rear hubs are available in 148x12 (Boost) and 157x12 (Superboost).
Weight
Front : from 144gr
Rear : from 243gr
Spoke holes
28 or 32 spoke holes.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
We only use big bearings on our MTB hubs so they may last as long as your wheels.
Front Boost : 2x 6903
Front DH : 2x 6805
Rear Sram XD : 4x 6902
Rear Shimano Microspline : 3x 6902 + 1x 6802
Titanium freehub
We use Grade 5 titanium to make the freehub. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (60 engagement points)
The Ratchet Technology is one of the most reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
The hub geometry is a very important aspect of a hub design. It defines the spokes length, but more importantly the wheel lateral stiffness. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open our hubs by hand, just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are searching an european company able to produce it)
Anodizing process : In-house
Prices
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, improper assembly or maintenance by an unauthorized dealer.
- The warranty does not cover bearings.
Only for the initial owner.
ERASE MTB IS-6 holes Hubs
Made from 7075T6 aerospace aluminium, our mtb hubs ally strenght, reliability, easy servicing, great geometry, long life bearings and have an everlasting titanium freehub with a 6 degrees engagement.
- Titanium freehub
- 60 engagement points
- From 387 g / pair
LIFETIME Warranty
Referentie : WH03PT142PSS
Merk : PILOT
Gewicht : 304gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 142 TA
PILOT CYCLES Singlespeed freehub
Staat Nieuw 100%
Lekker setje voor een "happy me" prijsje
Referentie : ROSWICATARACE160CL
Merk : SWISSSTOP
Gewicht : 118gr.
Materiaal : STEEL STAINLESS
Spaakgaten : Geen info
Remtype : CENTERLOCK
Kleur : SILVER
Velgbreedte :
Naaftype :
Catalyst Race | Lightweight and Without Compromise
description
12% lighter than Catalyst Pro
two-piece construction
brake ring dimensions are optimized for race pads
1.8 mm thickness
aluminum alloy spider provides increased stiffness
new spider design for improved aerodynamics
140 | 160 mm
Centerlock mount
140 and 160 mm are UCI approved
Referentie : ROSWICATARACE140CL
Merk : SWISSSTOP
Gewicht : 106gr.
Materiaal : STEEL STAINLESS
Spaakgaten : Geen info
Remtype : CENTERLOCK
Kleur : SILVER
Velgbreedte :
Naaftype :
Catalyst Race | Lightweight and Without Compromise
description
12% lighter than Catalyst Pro
two-piece construction
brake ring dimensions are optimized for race pads
1.8 mm thickness
aluminum alloy spider provides increased stiffness
new spider design for improved aerodynamics
140 | 160 mm
Centerlock mount
140 and 160 mm are UCI approved
Referentie : Race Road 44 D72844 New 2:1 24H Orn
Merk : WHEELSTUFF
Gewicht : 428gr.
Materiaal : CARBON
Spaakgaten : 24
Remtype : DISC
Kleur : BLACK MATTE
Velgbreedte : 21,0 28,0 44,0 OS 0,0
Naaftype :
Referentie : Road Orn 44 New OFFSET 28H
Merk : WHEELSTUFF
Gewicht : 436gr.
Materiaal : CARBON
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK MATTE
Velgbreedte : 21,0 28,0 44,0 OS 2,0
Naaftype :
Hole: 28H
Disc Brake
Internal/External Width: 21mm/28mm4. Depth: 44mm
Asymmetric drilling, 2mm
UD matt finish
14/14 X2/X2
Hooked
Referentie : AC23EXEPM222
Merk : EXUSTAR
Gewicht : 320gr.
Materiaal : STEEL STAINLESS
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
Details
CNC-MACHINED CLIP-IN PEDALS
Featuring a strong, extruded, CNC body, this pedal is built on a rigid, smooth running mechanism consisting of a Cr-Mo axle and a slimline dual bearing system. A gauge makes precise binding tension adjustment easy.
• Extruded, CNC-machined aluminum body
• Abrasion guard
• Tension gauge
Specs
Interface EPS-M (Compatible with Shimano SPD).
Body Extruded, CNC-machined aluminum, anodized black with stainless steel abrasion guard.
Axle Heat-treated, CNC-machined Cr-Mo axle.
Bearings Needle, & sealed.
Binding Double-sided Cr-Mo, tension adjustable with gauge.
Cleats E-C05F
Size 82.2 x 61.6 mm
Weight 310g/pr
Compatible with Exustar 2 bolt shoes, other 2 bolt hole shoes.
Referentie : FHP5CL32N12
Merk : HOPE
Gewicht : 182gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
Referentie : RHP5CL32N142TSA
Merk : HOPE
Gewicht : 300gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype : IS (6-BOLT)
Kleur : ORANGE
Velgbreedte :
Naaftype : 12 X 142 TA
Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all our experience to meet and exceed the demands of current and future bike technology.
The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag.
One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4.
Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability.
Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity.
As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings....And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future proofing your wheels.
Completely new for the Pro 5 is the option of Centrelock disc fitting and an e-bike specific hub that comes with a freehub tailor made for the stresses and strains of e-bike use. 20mm
Referentie : 20031
Merk : REVERSE
Gewicht : 144gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 15 X 110 TA BOOST
Productomschrijving
De superlichte Base Boost voornaaf is ontworpen voor elk doel.
Het robuuste ontwerp en de 2 meervoudig afgedichte industriële lagers garanderen lange prestaties en lage onderhoudskosten.
Referentie : VLDTTUBVALVE757S
Merk : DT SWISS
Gewicht : 0gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
The lightweight alloy valve saves 40% weight compared to brass valves. The integrated valve tool in the top cap saves time and effort when it comes to screwing & unscrewing the valve core during tubeless installation. The conical valve base ensures a sealed fit. The DT Swiss tubeless valve perfectly matches DT Swiss rims, to ensure a perfect seal for long, hassle-free rides
Referentie : GICR1431000 --IZD SAP1711\
1
Merk : SAPIM
Gewicht : 5.5gr.
Materiaal : STEEL STAINLESS
Spaakgaten : Geen info
Remtype :
Kleur : SILVER
Velgbreedte :
Naaftype :
CX-Ray
The CX-Ray still receives one of the best results in fatigue testing of any spoke. Its unique strength and flexibility make the CX-Ray suitable for most bicycle disciplines. The middle section of the spoke is drawn then pressed in a special mold to form its specific profile. CX-Ray spokes are used by top bike racers and triathletes around the world. Even downhillers use them, recognizing their strength and flexibility. Special alloy treatment and sophisticated production make this all possible. The CX-Ray fits in all standard hub holes.
No extra hub hole design; hub manufacturer‘s guarantee is unaffected.
Almost as light as Titanium.
More long lasting than any other spokes on the market.
Extremely high fatigue test results.
Special alloy treatment and sophisticated production.
The best aerodynamic elliptic spoke available.
Produced from high-tensile, fatigue-resistant 18/8 stainless steel conforming to the Sapim quality standard specifications.
Referentie : GICT1431000 ZOIZD SAP1726\
SAP1125
Merk : SAPIM
Gewicht : 6gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
CX-Sprint
Similar to the CX-Ray but stiffer. Higher stiffness is due to more material and therefore the spoke is slightly heavier. But still the elliptic shape of 2,3/1,2 fi ts in all standard hub holes. Some professionals use the CX-Sprint on the drive side and the CX-Ray on the non-drive side. This shall bring a more equal stiffness on right and left side in one wheel.
No more extra hub hole design; the hub manufacturer‘s guarantee is unaffected.
Aerodynamic elliptic spoke.
Produced from high-tensile, fatigue-resistant 18/8 stainless steel conforming to the Sapim quality standard specifi cations.
Special aluminium treatment and sophisticated production
Technical specs
Diameter: 2.0 - (2.25 x 1.25) - 2.0
Length: 145-310 mm
Weight: 334 g (64 x 260 mm)
Strength on middle section: 1430 N/mm2
Referentie : GICT1428000ZO---SAP1126GICT1431000 ZO-ZD SAP1597
Merk : SAPIM
Gewicht : 6gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
CX-Sprint
Similar to the CX-Ray but stiffer. Higher stiffness is due to more material and therefore the spoke is slightly heavier. But still the elliptic shape of 2,3/1,2 fi ts in all standard hub holes. Some professionals use the CX-Sprint on the drive side and the CX-Ray on the non-drive side. This shall bring a more equal stiffness on right and left side in one wheel.
No more extra hub hole design; the hub manufacturer‘s guarantee is unaffected.
Aerodynamic elliptic spoke.
Produced from high-tensile, fatigue-resistant 18/8 stainless steel conforming to the Sapim quality standard specifi cations.
Special aluminium treatment and sophisticated production
Technical specs
Diameter: 2.0 - (2.25 x 1.25) - 2.0
Length: 145-310 mm
Weight: 334 g (64 x 260 mm)
Strength on middle section: 1430 N/mm2
Referentie : DUNA021 MS
Merk : DUKE
Gewicht : 261gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
DUKE BADBOY HUBS
DUKE BadBoy hubs are 100% European design and manufacturing, synonymous with reliable and high quality products.
Titanium freewheel with 40 crans.
We carefully select our subcontractors to produce a hub that strictly meets our specifications. Also, machining, anodizing, laser engraving, are exclusively carried out in Europe, the assembly is carried out in our premises in the Vendée.
Our experience as an artisanal wheel fitter gives us perspective on the concepts and technologies of the market. As a result, we offer you a hub that combines the best technologies available on the market while adding our exclusive Duke signature.
Stainless steel bearings. The DUKE BadBoy hub has bearings that are offset as far outwards as possible to reduce the stress on the bearing and thus improve fluidity and durability. Its geometry is hyper-optimized.
Moreover the BadBoy inaugurate black finishes of the most beautiful effect! The Titanium freewheel body is available in 40 teeth.
DATA SHEET
Referentie : Luc Duro DUNA020 test
Merk : BITEX
Gewicht : 142gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 15 X 110 TA BOOST
BITEX HUB
Hubs known for their excellent quality ratio
The hub is important because it is the main load bearing component of the bike. It carries the weight of the bike and the rider, with all the stresses that rest on the hubs. It is at the center of the bicycle's performance requirements, Bitex offers a wide range of hubs that provide:
- Superior strength and stiffness
- Durability and reliability
- Very light weight
- Smoothest rolling performance
- Safe value
- Excellent finish
Referentie : EB8843 810191015253
Merk : ENDURO
Gewicht : 0gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
S6903 LLB - Stainless Steel Radial Bearing (C3 Clearance) - 17mm x 30mm x 7mm This radial bearing features 440C stainless steel alloy races and Grade 10 balls with dual - seals and 90% fill with Mobil XHP 222 high pressure water proof grease to withstand daily abuse of use and the elements. Radial bearing generally used as a hub bearing, as a bottom bracket bearing for some older square taper BBs, and can be used as a pivot bearing, though the MAX - type version of this bearing is better suited for suspension use. . Not all stainless steel is created equal. Enduro only uses 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. 440C has the highest strength, hardness, and wear resistance of all the standard 440 - series stainless alloys with high carbon content. As expected, it is also the most expensive of the 440 series alloys and requires multiple rounds of heat treatment and cryogenic treatment to achieve its superior mechanical properties. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash your bike often, or where sweat can be a problem. Enduro stainless bearings all carry a full two year anti - corrosion warranty. The Enduro line of bearings are available in high - carbon chromium steel, 440C stainless steel, ceramic - hybrid and XD15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual - lip seals that ride in a micro - groove creating a full labyrinth to provide superior protection against the elements.
Referentie : FHP532N15B
Merk : HOPE
Gewicht : 188gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype :
>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fittingR, 9mm, 12mm, 15mm and 20mm
Referentie : FHP532R15B
Merk : HOPE
Gewicht : 186gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype : IS (6-BOLT)
Kleur : RED
Velgbreedte :
Naaftype : 15 X 110 TA BOOST
>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
Referentie : RHP532N148SA
Merk : HOPE
Gewicht : 312gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Key Features
Improved sealing to stop dirt ingress and to reduce drag
New Labyrinth seal has zero drag for incredible freewheeling performance
New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
New step down axle design for a stiffer more durable freehub
New hub body profile for increased stiffness without adding weight
Fully serviceable and rebuildable with simple tools
Available with all modern freehub bodies
End spacers can be easily swapped to suit different frame and axle standards
32 Hole
6 bolt disc fitment
148x12mm
Shimano HG Alloy, Shimano HG Steel, Shimano MicroSpline, XD, XDR freehub options
Referentie : ROSWISHIMRACE34RS
Merk : SWISSSTOP
Gewicht : 0gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
FITS
Shimano
Pad Types
K03S
K02S
L03A
L02A
L04C
Brake Calipers
Dura Ace BR-R9270,BR-R9170
Ultegra BR-R8170,BR-R8070
105 BR-R7070
Tiagra BR-4770
GRX BR-RX810,BR-RX400
XTR BR-M9100,BR-M9110
XT BR-M8110
SLX BR-M7110
Metrea BR-U5000
BR-RS805
BR-RS505
BR-RS405
BR-RS305
TRP
Brake Calipers
HD-T910
Tektro
Brake Calipers
HD-R510
HD-R310
REVER
Brake Calipers
MCX1 Flat Mount
CHARACTERISTICS
consistently quiet operation
smooth feel in the brake lever
predictable and progressive brake power
very high durability
PERFORMANCE
0 (WORST) - 10 (BEST)
Initial Bite: 10
Modulation: 8
Longevity: 8
Heat Tolerance: 8
Noise Dry: 10
Noise Wet: 10
Referentie : MCFC42TLR24DMe
Merk : MC
Gewicht : 445gr.
Materiaal : CARBON 6K WEAVE
Spaakgaten : 24
Remtype :
Kleur : 6K WEAVE TO BLACK
Velgbreedte : 21,6 28,0 42,0 OS 0
Naaftype :
Referentie : MCFC47TLR24DTe
Merk : MC
Gewicht : 460gr.
Materiaal : CARBON 6K WEAVE
Spaakgaten : 24
Remtype :
Kleur : 6K WEAVE TO BLACK
Velgbreedte : 20,7 27,0 47,0 OS 0
Naaftype :
Key features:
What it is NOT, a regular rim with conventional carbon layup...
6K Weaving Rims, exclusive and flawless carbon finish rims with outstanding technical values, MADE in Europe!
These rims can be used with spoke washers, the secret of performance wheels that last forever!
Belangrijkste kenmerken:
Wat het NIET is, een gewone velg met conventionele carbon inleg...
6K Weaving velgen, exclusieve en onberispelijke velgen met carbonafwerking met uitstekende technische waarden, MADE in Europe!
Deze velgen kunnen worden gebruikt met spaakringen, het geheim van prestatiewielen die eeuwig meegaan!
Referentie : #90724
Merk : NEWMEN
Gewicht : 400gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK
Velgbreedte : 25,0 28,25 17,5 OS 0
Naaftype :
XR voor RACE VELGEN!!
Bij Aluminium velgen is 400gr voor een velg een zeer goede compromis in velgbreedte en gewicht.
Just as their carbon fiber counter part the Evolution SL X.R.25 rims are probably the lightest of their kind. With 25mm inner width at 415g they up the performance of your gravel bike noticeably. They are a lot lighter and a lot more comfortable than the usual aero profiles of other aluminium gravel rims.
Washer Required
yes
Diameter
29"
Eyelets
no
Model Family
Evolution SL
Max. System Weight
130kg
Rim Profile
hookless tubeless ready
Inner Width
25mm
Spoke Hole Number
28h
Weight
400g
Intended use
Gravel & CX
Material
6069 Aluminium
Referentie : MCFC28TLR24DTe
Merk : MC
Gewicht : 385gr.
Materiaal : CARBON 6K WEAVE
Spaakgaten : 24
Remtype :
Kleur : 6K WEAVE TO BLACK
Velgbreedte : 26,0 31,0 28,0 OS 2
Naaftype :
Key features:
What it is NOT, a regular rim with conventional carbon layup...
6K Weaving Rims, exclusive and flawless carbon finish rims with outstanding technical values, MADE in Europe!
These rims can be used with spoke washers, the secret of performance wheels that last forever!
Belangrijkste kenmerken:
Wat het NIET is, een gewone velg met conventionele carbon inleg...
6K Weaving velgen, exclusieve en onberispelijke velgen met carbonafwerking met uitstekende technische waarden, MADE in Europe!
Deze velgen kunnen worden gebruikt met spaakringen, het geheim van prestatiewielen die eeuwig meegaan!
Referentie : FHP532NQR
Merk : HOPE
Gewicht : 186gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
Referentie : FHP536N12
Merk : HOPE
Gewicht : 186gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
Referentie : P10064
Merk : RYDE
Gewicht : 550gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK
Velgbreedte : 19,0 25,02 0,5 OS 0
Naaftype :
Specificaties van de velg:
Merk: Rigida - Ryde
Type: Etrack
Kleur: Zwart
Maat (Inch/MM): 26" / 559
Externe breedte (MM): 24
Interne breedte (MM): 19
Gewicht (GR): 540
Materiaal: Aluminium
Enkelwandig / Dubbelwandig: Dubbelwandig
Enkel gebust / Dubbel gebust: Enkel gebust
Aantal spaakgaten: 32
Maat spaaknippel: 14
Remvlak aanwezig: Ja
Gegevens voor bij gebruik van de Sapim spaaklengteberekening tool:
Interne velgdiameter (MM *Niet ERD*): 528
Velgdikte (MM): 2
Aantal spaken in het wiel: 32
Referentie : VLDTRR51124
Merk : DT SWISS
Gewicht : 546gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : RIM
Kleur : BLACK
Velgbreedte : 18,0 21,5 32,0 OS 0
Naaftype :
Anyone wanting to build a reliable super-stiff wheel is starting in the right place with the RR 511. Thanks to a state-of-the-art aluminum alloy and surface treatment, this extremely robust 32-mm-high semi-aero rim is lighter than you would think. And those thinking of using it on gravel or cyclo-cross courses can easily install tubeless tires.
Referentie : FHP5CL24N12
Merk : HOPE
Gewicht : 186gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
Referentie : I9_HS_RR_326B_BKHG
Merk : INDUSTRY NINE
Gewicht : 165gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
Key Features
Industry Nine Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic mountain hub is made start to finish in our Asheville, NC machine shop. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to our own in-house anodization lab, every step of design, engineering, manufacturing and assembly is done on premises to our exacting standards.
Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. Our range boasts a universe of standard options in terms of axle fit, spoke hole drillings, disc rotor mounting, freehub bodies, and colors.
Referentie : I9_HS_RR_326B_BKHG
Merk : INDUSTRY NINE
Gewicht : 296gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 157 TA SUPER BOOST PLUS
Key Features
Industry Nine Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic mountain hub is made start to finish in our Asheville, NC machine shop. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to our own in-house anodization lab, every step of design, engineering, manufacturing and assembly is done on premises to our exacting standards.
Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. Our range boasts a universe of standard options in terms of axle fit, spoke hole drillings, disc rotor mounting, freehub bodies, and colors. E-bike Class 1 compatible.
Referentie : FHP536NQR
Merk : HOPE
Gewicht : 186gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
Referentie : FHP5CLSP24N12
Merk : HOPE
Gewicht : 140gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
Description
Specs
24 Hole
Centre Lock
Straight Pull Hub
Key Features
New hub body profile for increased stiffness without adding weight
Fully serviceable and rebuildable with simple tools
Available with all modern freehub bodies
End spacers can be easily swapped to suit different frame and axle standards
Sealed Stainless Steel cartridge bearings throughout
Hub shell machined from forged 2014 T6 aluminium billet
Referentie : DUNA021 XD
Merk : DUKE
Gewicht : 257gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
DUKE BADBOY HUBS
DUKE BadBoy hubs are 100% European design and manufacturing, synonymous with reliable and high quality products.
Titanium freewheel with 40 crans.
We carefully select our subcontractors to produce a hub that strictly meets our specifications. Also, machining, anodizing, laser engraving, are exclusively carried out in Europe, the assembly is carried out in our premises in the Vendée.
Our experience as an artisanal wheel fitter gives us perspective on the concepts and technologies of the market. As a result, we offer you a hub that combines the best technologies available on the market while adding our exclusive Duke signature.
Stainless steel bearings. The DUKE BadBoy hub has bearings that are offset as far outwards as possible to reduce the stress on the bearing and thus improve fluidity and durability. Its geometry is hyper-optimized.
Moreover the BadBoy inaugurate black finishes of the most beautiful effect! The Titanium freewheel body is available in 40 teeth.
DATA SHEET
Referentie : WIELSET ENDURO SUPERBOOST
Merk : HOPE
Gewicht : 0gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype :
Kleur : RED
Velgbreedte : IW 30
Naaftype : 12 X 148 TA BOOST
Beschrijving
PRO4 15MM X 110MM IS 32H BOOST RED
PRO4 12MM X 157MM IS 32H SUPER BOOST MICROSPLINE RED
"EVOLUTION SL E.G.30 29"" 32H ENDURO ROUND PROFILE MAX. SYSTEMWEIGHT 180KG
Staat Lagers Hope naven gereviseerd 95%
Staat velgen 75%
Staat spaken 75%
Bij deze set zit een voucher voor 1 nieuwe velg van 25€
Referentie : #90152
Merk : NEWMEN
Gewicht : 440gr.
Materiaal : CARBON
Spaakgaten : 32
Remtype :
Kleur : BLACK GRAY
Velgbreedte : 30,0 OS ERD 559
Naaftype :
Going full enduro...with carbon fiber? Convinced by the durability of our aluminium rims for enduro use compared to carbon fiber rims, we started developing a 30mm carbon fiber rim initially meant for trailbike use. The result of this project is the NEWMEN Advanced SL A.30 rim with industry leading strength to weight ratio - even strong enough for our EWS riders.
colour
black
size
584x30, 28h
material
carbon
weight 434gr
Referentie : #90522
Merk : NEWMEN
Gewicht : 440gr.
Materiaal : CARBON
Spaakgaten : 28
Remtype :
Kleur : BLACK GRAY
Velgbreedte : 30,0 OS ERD 559
Naaftype :
Going full enduro...with carbon fiber? Convinced by the durability of our aluminium rims for enduro use compared to carbon fiber rims, we started developing a 30mm carbon fiber rim initially meant for trailbike use. The result of this project is the NEWMEN Advanced SL A.30 rim with industry leading strength to weight ratio - even strong enough for our EWS riders.
colour
black
size
584x30, 28h
material
carbon
weight 434gr
Referentie : BP01PTSP31NB
Merk : PILOT
Gewicht : 320gr.
Materiaal : TITANIUM
Spaakgaten :
Remtype :
Kleur : SILVER
Velgbreedte :
Naaftype :
Brushed with sandblasted logo’s
Weight from 228 gr.
Light and comfortable
24-months warranty
Ti Seatpost (0 - 15 mm setback)
Referentie : HOODY L
Merk : WHEELSTUFF
Gewicht : 0gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : BLACK GRAY
Velgbreedte :
Naaftype :
Productspecificaties:
Stof: 100% polyester
Stofdikte: 345 g/m²
Pasvorm: Fitted
Maat / Merk Label: Beide
Maattabel:
Maat Lengte Breedte
S 69 51
M 71 54
L 73 57
XL 75 60
XXL 77 63
3XL 79 66
4XL 81 69
Let op: Bovenstaande maten kunnen +- 2.5 % afwijken
Referentie : RHP532C148XD
Merk : HOPE
Gewicht : 312gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype : IS (6-BOLT)
Kleur : ORANGE
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Key Features
Improved sealing to stop dirt ingress and to reduce drag
New Labyrinth seal has zero drag for incredible freewheeling performance
New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
New step down axle design for a stiffer more durable freehub
New hub body profile for increased stiffness without adding weight
Fully serviceable and rebuildable with simple tools
Available with all modern freehub bodies
End spacers can be easily swapped to suit different frame and axle standards
Referentie : FHP532C15B
Merk : HOPE
Gewicht : 186gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype : IS (6-BOLT)
Kleur : ORANGE
Velgbreedte :
Naaftype : 15 X 110 TA BOOST
>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
Referentie : RHP532C148EXD
Merk : HOPE
Gewicht : 394gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : ORANGE
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Key Features
54 Tooth heavy duty steel freehub body
Improved sealing to stop dirt ingress and to reduce drag
New Labyrinth seal has zero drag for incredible freewheeling performance
New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
New step down axle design for a stiffer more durable freehub
New hub body profile for increased stiffness without adding weight
Fully serviceable and rebuildable with simple tools
Available with all modern freehub bodies
End spacers can be easily swapped to suit different frame and axle standards
Referentie : WIELSET E-BIKE
Merk : FUNWORKS
Gewicht : 0gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte : IW 30
Naaftype : 15 X 110 12 X 148 TA
Beschrijving
Fun-Works N-Light Custom naven, gemodificeerde stalen body, 24T en speciale pallen
BOOST
Zwart
Fun-Works Track Mack 30mm interne breedte
Sapim Race spaken en aluminium zwarte spaaknippels
Tubeless afgewerkt met 2 verschillende tapes
Aluminium ventiel (zwart)
Wheelstuff Sticker
Gewicht 2025gr.
Staat 100%
Staat velgen 100%
Staat spaken 100%
SUPER SOLID!!
Ref
3816
3817
3443
Referentie : WIELSET RACE 350 MCFC47TLR24DTe
Merk : MC
Gewicht : 1585gr.
Materiaal : CARBON 6K
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : 6K WEAVE TO BLACK
Velgbreedte : 21,6 28,0 42,0 OS 0
Naaftype : 12 X 100 12 X 142 TA
Key features: HANBUILT
What it is NOT, a regular rim with conventional carbon layup...
6K Weaving Rims, exclusive and flawless carbon finish rims with outstanding technical values, MADE in Europe!
Value for money DT SWISS 350 Centerlock Straight Pull hubs
These rims can be used with spoke washers, the secret of performance wheels that last forever!
Sapim CX-Sprint spokes and nipples
Belangrijkste kenmerken: HANDGEBOUWD
Wat het NIET is, een gewone velg met conventionele carbon inleg...
6K Weaving velgen, exclusieve en onberispelijke velgen met carbonafwerking met uitstekende technische waarden, MADE in Europe!
Waarde voor je geld DT SWISS 350 Centerlock Straight Pull-naven
Deze velgen kunnen worden gebruikt met spaakringen, het geheim van prestatiewielen die eeuwig meegaan!
Sapim CX-Sprint spaken en nippels
Wij kunnen uiteraard ook andere naven gebruiken uit ons gamma.
Ref
4762
Referentie : WIELSET MTB SINGLESPEED PILOT RYDE M30
Merk : PILOT
Gewicht : 2130gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : 6K WEAVE TO BLACK
Velgbreedte : 29,8 34,0 20,5 OS 3
Naaftype : 15 X 110 12 X 142 TA
Key features:
Standaard Pilot Cycles wielset met:
15x110 TA Boost voornaaf
12x142 TA achternaaf SINGLESPEED HG1
Spaken zijn PG 2.0
Staat Nieuw 100%
Wij kunnen uiteraard ook andere naven gebruiken uit ons gamma.
Was oorspronkelijke wielset van een Pilot DURO fiets.
Staat Nieuw 100%
Lekker setje voor een "happy me" prijsje
Referentie : FS-29H20-C36
Merk : WP
Gewicht : 285gr.
Materiaal : CARBON UD
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK
Velgbreedte : 30,0 36,0 20,0 OS 2,0
Naaftype :
MTB 29-H20-W36 Carbon Velg
285g (+/- 15g)
Velg hoogte 20 mm
External breedte 36 mm
Internal breedte 30 mm
Use 29ER Mountain Bike Rim
Finish UD Matte
Production X-Shaped / Hyper Light
Tubeless Ready Asymmetrical
Max Spoke tension
130kgf
Referentie : #90134
Merk : NEWMEN
Gewicht : 467gr.
Materiaal : CARBON
Spaakgaten : 32
Remtype :
Kleur : BLACK GRAY
Velgbreedte : 30,0 OS ERD 597
Naaftype :
TECHNICAL INFORMATION / DESCRIPTION
Going full enduro...with carbon fiber? Convinced by the durability of our aluminium rims for enduro use compared to carbon fiber rims, we started developing a 30mm carbon fiber rim initially meant for trailbike use. The result of this project is the NEWMEN Advanced SL A.30 rim with industry leading strength to weight ratio - even strong enough for our EWS riders.
Referentie : A291SB-20H-QR A291SB-24H-QR
Merk : NOVATEC
Gewicht : 80gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : QUICK RELEASE
Kleur : BLACK
Velgbreedte :
Naaftype : 5 X 100 QR
NOVATEC A291SB HUBS
Competitive front hubs for their excellent quality/price ratio and a very contained weight. One of the best brand of hubs from Asia, especially for the quality of the bearings from Japan, the country of High Technology!
Referentie : F482SB-130QR5-24H SHIM F482SB-130QR5-28H SHIM
Merk : NOVATEC
Gewicht : 245gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : QUICK RELEASE
Kleur : BLACK
Velgbreedte :
Naaftype : 5 X 130 QR
NOVATEC F482SB HUBS
Competitive rear hubs for its excellent quality/price ratio. One of the best brand of hubs from Asia, especially for the quality of the bearings from Japan, the country of High Technology!
Referentie : VLDTRR41124
Merk : DT SWISS
Gewicht : 435gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : RIM
Kleur : BLACK
Velgbreedte : 18,0 21,5 21,0 OS 2,0
Naaftype :
PRODUCT DETAILS
The most advanced alloy existing for rims meets the most advanced rim profile to form the RR 411 rim. From the moment the alloy is melted all the way to the secret surface treatment, this rim is all about getting the absolute best out of the great, shiny metal that is aluminum. Very light, very strong, very classy is the result. The RR 411 is available with a symmetric as well as an asymmetric rim profile.
MATERIAL
ALUMINIUM
Referentie : VLDTRR51128
Merk : DT SWISS
Gewicht : 546gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : RIM
Kleur : BLACK
Velgbreedte : 18,0 21,5 32,0 OS 0
Naaftype :
Anyone wanting to build a reliable super-stiff wheel is starting in the right place with the RR 511. Thanks to a state-of-the-art aluminum alloy and surface treatment, this extremely robust 32-mm-high semi-aero rim is lighter than you would think. And those thinking of using it on gravel or cyclo-cross courses can easily install tubeless tires.
Referentie : NVDT350F24CL6769S
Merk : DT SWISS
Gewicht : 138gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 100 TA
PRODUCT DETAILS
The 350 hub is a dependable road mate for every adventure, whether on asphalt or gravel roads. A lightweight axle in combination with a milled hub body ensures a low weight while the proven Ratchet System with 36 teeth guarantees reliable power transmission. The plug-in construction allows maintenance of the freehub system without special tools and conversion to different standards - for maximum versatility.
MATERIAL
Aluminum
Referentie : WIELSET GRAVEL OHR ALU
Merk : OHR
Gewicht : 1690gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte : 24,0 29,0 22,0 OS 0
Naaftype : 12 X 100 12 X 142 TA
Key features:
Standaard OHR Cycles wielset met
OHR SP 12x100 TA voornaaf
OHR SP 12x142 TA achternaaf HG11
Spaken 24H PG 1.9
Was oorspronkelijke wielset van een Pilot SCRAM fiets.
Staat Nieuw 100%
Lekker setje voor een "happy me" prijsje
Referentie : SSTRZW Strong Butted 13G/14G zwart xxx
Merk : SAPIM
Gewicht : 6.96gr.
Materiaal : STEEL STAINLESS
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
Strong
Like it says, this spoke is very strong. The Strong is developed for specific and heavy usage such as tandem, e-bikes or heavy load use. In case of large hub holes, the Strong is the recommended choice.
Technical specs
Weight: (64 pcs x 260 mm lg) 446 g
Quality: Stainless
Strength on middle section: 1250 N/mm2
Dimensions
Length: 180-310 mm
Diameter: 2.3 - 2.0 mm
Options
Rod (without bend) or different bend
Self locking system
Black (oxidised or chromed)
Anti-rotation part
Oval head
2-sides threading
Referentie : 42057
Merk : RYDE
Gewicht : 618gr.
Materiaal : ALUMINUM
Spaakgaten : 24
Remtype : DISC
Kleur : BLACK
Velgbreedte : 18,0 25,0 30,0 OS 2,4
Naaftype :
Omschrijving
Specificaties van de velg:
Merk: Rigida - Ryde
Type: DP18 Speed Disc
Kleur: Zwart
Maat (Inch/MM): 28" / 622
Externe breedte (MM): 23
Interne breedte (MM): 18
Gewicht (GR): 618
Materiaal: Aluminium
Enkelwandig / Dubbelwandig: Dubbelwandig
Enkel gebust / Dubbel gebust: Ongebust
Aantal spaakgaten: 24
Maat spaaknippel: 14
Remvlak aanwezig: Nee
Gegevens voor bij gebruik van de Sapim spaaklengteberekening tool:
Interne velgdiameter (MM *Niet ERD*): 563
Velgdikte (MM): 2
Aantal spaken in het wiel: 24
Aantal kruisingen tandwielzijde: Naar keuze
Aantal kruisingen linkerzijde: Naar keuze
Referentie : WIELSET GRAVEL SHUTTER PRECISION DYN test Gravel1
Merk : SHUTTER PRECISION
Gewicht : 1020gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte : 24,0 29,0 22,0 OS 0
Naaftype : 12 X 100 12 X 142 TA
Key features:
Hub: PD-7 HUB DYNAMO - 6-BOLT - 6V 3W 32H
Size: 12X100MM
Rim: RYDE M22
Spoke: SAPIM LASER
Spoke Nipple: SAPIM ALU RED
Use: GRAVEL or WORK or TRAVEL
Staat Nieuw 100%
Lekker setje voor een "happy me" prijsje
Referentie : WIELSET LightB Road 21 Acces Hole test
Merk : WHEELSTUFF
Gewicht : 1568gr.
Materiaal : CARBON UD
Spaakgaten : 28
Remtype : DISC
Kleur : UD SATIN FINISH
Velgbreedte : 21,0 28 45,0 OS 2,0
Naaftype : 12 X 100 12 X 142 TA
Key features:
Hub: ERASE ROAD
Size: 12X100MM 12x142MM
Rim: WHEELSTUFF CARBON CLINCHER 45MM IW21 28H HOOK OFFSET 2MM
Spoke: SAPIM LASER
Spoke Nipple: SAPIM ALU BLACK
Use: ROAD or WORK or TRAVEL
Staat Gebruikt 100%
Lekker setje
CARBON CLINCHER 45MM IW21 28H HOOK OFFSET 2MM SAPIM LASER 7.5bars MAX RIDER 135kg
ref
3915
3945
3946
Referentie : WIELSET GRAVEL ERASE MCFC28TLR24DTe
Merk : MC
Gewicht : 1435gr.
Materiaal : CARBON 6K WEAVE
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : 6K WEAVE TO BLACK
Velgbreedte : 21,6 28,0 42,0 OS 0
Naaftype : 12 X 100 12 X 142 TA
Key features: HANBUILT
What it is NOT, a regular rim with conventional carbon layup...
6K Weaving Rims, exclusive and flawless carbon finish rims with outstanding technical values, MADE in Europe!
Value for money ERASE Centerlock J-bend hubs, LIFETIME WARRANTY MADE in BELGIUM!
These rims can be used with spoke washers, the secret of performance wheels that last forever!
Sapim CX-Sprint spokes and nipples
Belangrijkste kenmerken: HANDGEBOUWD
Wat het NIET is, een gewone velg met conventionele carbon inleg...
6K Weaving velgen, exclusieve en onberispelijke velgen met carbonafwerking met uitstekende technische waarden, MADE in Europe!
Waarde voor je geld ERASE Centerlock J-bend naven, LIFETIME WARRANTY MADE in BELGIUM!
Deze velgen kunnen worden gebruikt met spaakringen, het geheim van prestatiewielen die eeuwig meegaan!
Sapim CX-Sprint spaken en ZWARTE nippels
Wij kunnen uiteraard ook andere naven gebruiken uit ons gamma.
https://www.instagram.com/reel/CvSlz-sMiSh/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
ref
4762
4308
4309
Referentie : DUXCV2002
Merk : DUKE
Gewicht : 376gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype :
Kleur : BLACK
Velgbreedte : 23,5 26,4 16 OS 2
Naaftype :
The Lucky Star Ultra is a lightweight pure XC aluminium rim. It is characterised by its unrivalled stiffness/weight and strength/weight ratios, thanks in part to the use of Dynamal aluminium.
DUKE has created an innovative profile, following its own experience with a very strict specification.This rim inaugurates a new modern geometry with an asymmetric profile and hookless walls.The rim holes are off-centre (offset), which makes it possible to close the spoke umbrella more tightly. This rim is more stable and increases the lateral stiffness of the wheel.The spoke tensions between the two plies are more balanced, which guarantees a better durability of the wheel.The hookless rim walls allow for both rim reinforcement and weight reduction.
Referentie : WIELSET GRAVEL ERASE MCFC28TLR24DTe
Merk : MC
Gewicht : 1350gr.
Materiaal : CARBON 6K WEAVE
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : 6K WEAVE TO BLACK
Velgbreedte : 26,0 31,0 28,0 OS 2
Naaftype : 12 X 100 12 X 142 TA
Key features: HANBUILT and Lightweight 1350 grammmmmss
What it is NOT, a regular rim with conventional carbon layup...
6K Weaving Rims, exclusive and flawless carbon rims with outstanding technical values, MADE in Europe!
Very Light Hubset Ratched like 350 DT Swiss.
These rims can be used with spoke washers, the secret of performance wheels that last forever!
Sapim CX-Sprint spokes and nipples
Belangrijkste kenmerken: HANDGEBOUWD en licht gezicht 1350 grammmmmss
Wat het NIET is, een gewone velg met conventionele carbon inleg...
6K Weaving velgen, exclusieve en onberispelijke velgen met uitstekende technische waarden, MADE in Europe!
Zeer lichte naafset met Ratchet a la DT 350 Swiss
Deze velgen kunnen worden gebruikt met spaakringen, het geheim van prestatiewielen die eeuwig meegaan!
Sapim CX-Sprint spaken en ZWARTE nippels!!
Wij kunnen uiteraard ook andere naven gebruiken uit ons gamma.
ref
4762
4703
4704
Referentie : WIELSET Road 21 Acces Hole test Orn
Merk : WHEELSTUFF
Gewicht : 1590gr.
Materiaal : CARBON 6K WEAVE
Spaakgaten : 28
Remtype : CENTERLOCK
Kleur : 6K WEAVE TO BLACK
Velgbreedte : 21,0 28,0 44,0 OS 2,0
Naaftype : 12 X 100 12 X 142 TA
Key features: HANDBUILT
Hole: 28H
Disc Brake
Internal/External Width: 21mm/28mm Depth: 44mm
Asymmetric drilling, 2mm
UD matt finish
14/14 X2/X2
Hooked
Wij kunnen uiteraard ook andere naven gebruiken uit ons gamma.
ref
4596
4692
4693
Referentie : PTNREVO29ML /stuk
Merk : PTN
Gewicht : 109gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
PER STUK!
Productomschrijving
Video
R-Evolution, de revolutie van de evolutie! De R-Evolution van Pepi's Tire Noodle is een revolutionaire insert ontwikkeld met de hulp van de beste mountainbikers ter wereld. Een unieke lichtgewicht structuur van dit type optimaliseert de werking van tubeless set-ups, verhoogt de rijprecisie, beschermt de velgen en maakt het zelfs mogelijk om met en platte band te rijden. Raadpleeg de maattabel om te zien welke maat bij u past.
Details:
Lichtgewicht schuim met gesloten cellen.
Gemakkelijk te installeren en te verwijderen.
Anti-pinch velg bescherming.
Perfecte bandendemping, minder trillingen.
Verminderde rolweerstand.
Hoogste stuurprecisie.
Geen zijdelingse beweging van de banden.
Compatibel met alle tire sealants.
Inhoud van de kit:
2x PTN R-Evolution inzetstukken.
2x ULFT Ultralight tubeless ventielen.
Multifunctionele stoffen tas.
Stickers voor frame en velg.
Instructies
Referentie : PTNREVO275ML /stuk
Merk : PTN
Gewicht : 109gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
PER STUK!
Productomschrijving
Video
R-Evolution, de revolutie van de evolutie! De R-Evolution van Pepi's Tire Noodle is een revolutionaire insert ontwikkeld met de hulp van de beste mountainbikers ter wereld. Een unieke lichtgewicht structuur van dit type optimaliseert de werking van tubeless set-ups, verhoogt de rijprecisie, beschermt de velgen en maakt het zelfs mogelijk om met en platte band te rijden. Raadpleeg de maattabel om te zien welke maat bij u past.
Details:
Lichtgewicht schuim met gesloten cellen.
Gemakkelijk te installeren en te verwijderen.
Anti-pinch velg bescherming.
Perfecte bandendemping, minder trillingen.
Verminderde rolweerstand.
Hoogste stuurprecisie.
Geen zijdelingse beweging van de banden.
Compatibel met alle tire sealants.
Inhoud van de kit:
2x PTN R-Evolution inzetstukken.
2x ULFT Ultralight tubeless ventielen.
Multifunctionele stoffen tas.
Stickers voor frame en velg.
Instructies
Referentie : #90519 testset Duro
Merk : NEWMEN
Gewicht : 1285gr.
Materiaal : CARBON
Spaakgaten : 28
Remtype : IS (6-BOLT)
Kleur : BLACK GRAY
Velgbreedte : 25,0 OS ERD 600
Naaftype : 15 X 110 12 X 142 TA
MAKE AN OFFER for this set!!
Momenteel in DEMO Titanium PILOT Duro fiets.
Hub Carbon-Ti 12x142
Superlight MTB or Road Disc X-12 Thru axle rear hub with 28 holes oversized Al7075-T6 CNC machined body and axle, I.S. disc rotor fixing system, Hi-performance sealed bearings with external preload system, Al7075-T6 free wheel Shimano/SRAM 9-10-11-12s compatible (XD Compatible SRAM 11-12 speed driver in optional). (X-Hub SL Disc X-12 28) is a very lightweight and sophisticated product and it is intended for Cross Country or Marathon use. Warranty voids when used on an electric-assisted bicycle (E-bike). Several anodized colours available. Conversion kit to swap from X-12 thru axle to quick release available (sold separately). 100% Made in Italy.
Hub BitexBITEX HUB 15 x 110
Hubs known for their excellent quality ratio
The hub is important because it is the main load bearing component of the bike. It carries the weight of the bike and the rider, with all the stresses that rest on the hubs. It is at the center of the bicycle's performance requirements, Bitex offers a wide range of hubs that provide:
- Superior strength and stiffness
- Durability and reliability
- Very light weight
- Smoothest rolling performance
- Safe value
- Excellent finish
Rim Newmen XA25 carbon 29" IW25mm
TECHNICAL INFORMATION / DESCRIPTION
Lightweight rims with just the right amount of stiffness make for blazing fast XC wheelsets. The NEWMEN FADE rear hub is significantly quieter compared to other hubs which makes for a completely different experience on the trail. Combining this hub technology with the new X.A.25 carbon fiber rim results in a wheelset with focus on durability and light weight.
Bevat Id
3692
4848
4662
4410
3668
3835
3599
4645
Referentie : HYPERLIGHT MTB CARBON UD ERASE
Merk : WP
Gewicht : 1264gr.
Materiaal : CARBON
Spaakgaten : 28
Remtype : CENTERLOCK
Kleur : UD SATIN FINISH
Velgbreedte : 30,0 36,0 20,0 OS 2,0
Naaftype : 15 X 110 12 X 148 TA
Rim:
MTB 29-H20-W36 Carbon Velg
285g (+/- 15g)
Velg hoogte 20 mm
External breedte 36 mm
Internal breedte 30 mm
Use 29ER Mountain Bike Rim
Finish UD Matte
Production X-Shaped / Hyper Light
Tubeless Ready Asymmetrical
Max Spoke tension
130kgf
Hubs:
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs are available in 110x15 (Boost) and 110x20 (DH).
The rear hubs are available in 148x12 (Boost) and 157x12 (Superboost).
Weight
Front : from 144gr
Rear : from 243gr
Spoke holes
28 or 32 spoke holes.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
We only use big bearings on our MTB hubs so they may last as long as your wheels.
Front Boost : 2x 6903
Front DH : 2x 6805
Rear Sram XD : 4x 6902
Rear Shimano Microspline : 3x 6902 + 1x 6802
Titanium freehub
We use Grade 5 titanium to make the freehub. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (60 engagement points)
The Ratchet Technology is one of the most reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
The hub geometry is a very important aspect of a hub design. It defines the spokes length, but more importantly the wheel lateral stiffness. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open our hubs by hand, just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are searching an european company able to produce it)
Anodizing process : In-house
Prices
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, improper assembly or maintenance by an unauthorized dealer.
- The warranty does not cover bearings.
Only for the initial owner.
ERASE MTB IS-6 holes Hubs
Made from 7075T6 aerospace aluminium, our mtb hubs ally strenght, reliability, easy servicing, great geometry, long life bearings and have an everlasting titanium freehub with a 6 degrees engagement.
- Titanium freehub
- 60 engagement points
- From 387 g / pair
LIFETIME Warranty
Bevat Id
4837
4836
4807
Referentie : Luc Scram WIELSET GRAVEL 25 Acces Hole test Orn
Merk : WHEELSTUFF
Gewicht : 1513gr.
Materiaal : CARBON UD
Spaakgaten : 24
Remtype : CENTERLOCK
Kleur : BLACK MATTE
Velgbreedte : 25,0 30,0 36,0 OS 2,0
Naaftype : 12 X 100 12 X 142 TA
Key features: HANBUILT Doe een bod!
Hole: 24H
Disc Brake
Internal/External Width: 25mm/30mm Depth: 36mm
Asymmetric drilling, 2mm
UD matt finish
14/14 X2/X2
Hookless
Spokes Sapim Front Race, Back CX-Sprint
Wij kunnen uiteraard ook andere naven gebruiken uit ons gamma.
ref
4583
4860
4592
https://www.instagram.com/p/Crl8ynYp70c/?hl=nl
Bike photo als illlustratie
25,0 30,0 36,0 OS 2,0
Referentie : V2 HUB MTB MICROSPLINE 12MM
Merk : ERASE
Gewicht : 0gr.
Materiaal : TITANIUM
Spaakgaten :
Remtype :
Kleur : SILVER
Velgbreedte :
Naaftype :
Titanium freehub (MTB, V2, Thru 12mm, Shimano Microspline)
V1 hubs are with adjustment play system and have been sold till 2021.
V2 hubs are without adjustment play system and been sold from 2022.
Referentie : ERASE MTB REAR HUB 28 V2 XD RED
Merk : ERASE
Gewicht : 232gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : CENTERLOCK
Kleur : RED
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Main informations
357 Weight (gr)
60 Engagement points
6900 Bearings series
380 Price (€)
Tech informations
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs are available in 110x15 (Boost).
The rear hubs are available in 148x12 (Boost) and 157x12 (Superboost).
Weight
Front : from 125gr
Rear : from 232gr
Spoke holes
28 or 32 spoke holes.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
We only use 6900 series bearings on our MTB hubs so they may last as long as your wheels.
Front : 2x 6903
Rear Sram XD : 4x 6902
Rear Shimano Microspline : 3x 6902 + 1x 6802
Titanium freehub
We use Grade 5 titanium to make the freehub. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (60 engagement points)
The Ratchet Technology is one of the most reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
The hub geometry is a very important aspect of a hub design. It defines the spokes length, but more importantly the wheel lateral stiffness. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open our hubs by hand, just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are searching an european company able to produce it)
Anodizing process : In-house
Prices
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, improper assembly or maintenance by an unauthorized dealer.
- The warranty does not cover bearings.
Only for the initial owner.
Referentie : H240NCDRR28SA4592S
Merk : DT SWISS
Gewicht : 212gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 142 TA
Dit is een artikel van een klant en de afwikkeling gebeurt via de klant.
De naaf is van 20/07/2022 en heeft heel weinig km en in zeer goede staat.
Werd vervangen wegens een neieuwe fiets met BOOST maat.
Let op dit is GEEN BOOST maar 12x142mm versie voor ROAD of MTB met die maten.
PRODUCT DETAILS
With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies the tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfers the energy invested directly into acceleration thanks to the 36 teeth.
MATERIAL
Aluminum
FREEHUB SYSTEM
Ratchet EXP 36
Referentie : SERVICE
Merk : WIEL_MAKEN
Gewicht : 0gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur :
Velgbreedte :
Naaftype :
Een wiel samenstellen voor gewicht en prijs?
Selecteer naaf + velg + spaken+ spaaknippel.
Tel daarbij €50 per wiel voor het handwerk en spaakrondellen.
Wij gebruiken altijd spaakrondellen, dit maakt een duurzaam wiel.
Het type dat we gebruiken hangt af van de velgen.
EEN VOLLEDIGE WIELSET omvat tubeless dichtmaken en ventielen in MTB wielen.
Lees hoe we een wiel opbouwen:
https://www.thewheelstuff.be/bike-blog/het-opbouwen-van-een-wiel/
Referentie : 178 - 315 14G WHITE
Merk : BERD
Gewicht : 2.5gr.
Materiaal : POLYPROPYLEEN
Spaakgaten : Geen info
Remtype :
Kleur : WHITE
Velgbreedte :
Naaftype :
TECHNOLOGY
Berd spokes are made from an advanced polymer called ultra high molecular weight polyethylene (UHMWPE) that has 12 times the strength-to-weight ratio of steel and floats on water. Berd spokes have an improved fatigue life compared to steel and are impervious to the elements.
Check out https://berdspokes.com/pages/technology
Referentie : 178 - 315 14G BLACK
Merk : BERD
Gewicht : 2.5gr.
Materiaal : POLYPROPYLEEN
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
TECHNOLOGY
Berd spokes are made from an advanced polymer called ultra high molecular weight polyethylene (UHMWPE) that has 12 times the strength-to-weight ratio of steel and floats on water. Berd spokes have an improved fatigue life compared to steel and are impervious to the elements.
Check out https://berdspokes.com/pages/technology
Referentie : ERASE MTB REAR HUB CL V2 28 BERD
Merk : ERASE
Gewicht : 230gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : CENTERLOCK
Kleur : BLACK MATTE
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
Tech informations
**ERASE MTB Boost Centerlock Rear (hooks for Berd spokes)**
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs are available in 110x15 (Boost)
The rear hubs are available in 148x12 (Boost)
Weight
Front : from 124gr
Rear : from 230gr
Spoke holes
28 or 32 spoke holes.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
We only use big bearings on our MTB hubs so they may last as long as your wheels.
Front Boost : 2x 6903
Front DH : 2x 6805
Rear Sram XD : 4x 6902
Rear Shimano Microspline : 3x 6902 + 1x 6802
Titanium freehub
We use Grade 5 titanium to make the freehub. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (60 engagement points)
The Ratchet Technology is one of the most reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
The hub geometry is a very important aspect of a hub design. It defines the spokes length, but more importantly the wheel lateral stiffness. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open our hubs by hand, just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are searching an european company able to produce it)
Anodizing process : In-house
Prices
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, improper assembly or maintenance by an unauthorized dealer.
- The warranty does not cover bearings.
Only for the initial owner.
ERASE MTB IS-6 holes Hubs
Made from 7075T6 aerospace aluminium, our mtb hubs ally strenght, reliability, easy servicing, great geometry, long life bearings and have an everlasting titanium freehub with a 6 degrees engagement.
- Titanium freehub
- 60 engagement points
- From 387 g / pair
LIFETIME Warranty
Referentie : ERASE MTB FRONT HUB CL V2 28 BERD
Merk : ERASE
Gewicht : 124gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 15 X 110 TA BOOST
Tech informations
**ERASE MTB Boost Centerlock Rear (hooks for Berd spokes)**
Materials
The hubshells, axles and caps are made from 7075T6 aerospace aluminium.
The freehub is made from Grade 5 titanium and the freewheel ratchet is made from stainless steel.
Axles sizes
The front hubs are available in 110x15 (Boost)
The rear hubs are available in 148x12 (Boost)
Weight
Front : from 124gr
Rear : from 230gr
Spoke holes
28 or 32 spoke holes.
Bearings
We are using radial and truly reliable bearings, sourced from TPI.
Bearings sizes
We only use big bearings on our MTB hubs so they may last as long as your wheels.
Front Boost : 2x 6903
Front DH : 2x 6805
Rear Sram XD : 4x 6902
Rear Shimano Microspline : 3x 6902 + 1x 6802
Titanium freehub
We use Grade 5 titanium to make the freehub. Why? Because we didn't want to see anymore sprocket marks on the freehub without taking too much weight.
Ratchet Technology (60 engagement points)
The Ratchet Technology is one of the most reliable system because 100% of the system surface is working when you put power on your pedals.
Geometry
The hub geometry is a very important aspect of a hub design. It defines the spokes length, but more importantly the wheel lateral stiffness. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
Easy service
- You can open our hubs by hand, just by pulling the end-caps off.
- When you pull the freewheel off the rear hub, every pieces stay in place.
- All pieces are large enough so that you'll never loose one of them, no thiny springs or little pawls.
Local sourcing
We didn't make any compromises and developped the hubs as we wanted it. But once the design was fixed, we searched the closest products sourcing and we are proud of this !
Aluminium : Belgium
Titanium : Belgium
Bearings : Taïwan
Seals : Netherlands
Springs : Taiwan (we are searching an european company able to produce it)
Anodizing process : In-house
Prices
110€ for the front hub.
270€ for the rear hub.
Warranty
Our hubs get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, improper assembly or maintenance by an unauthorized dealer.
- The warranty does not cover bearings.
Only for the initial owner.
ERASE MTB IS-6 holes Hubs
Made from 7075T6 aerospace aluminium, our mtb hubs ally strenght, reliability, easy servicing, great geometry, long life bearings and have an everlasting titanium freehub with a 6 degrees engagement.
- Titanium freehub
- 60 engagement points
- From 387 g / pair
LIFETIME Warranty
Referentie : LIGHT MTB ALU XA25 DTEXP240
Merk : NEWMEN
Gewicht : 1470gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : IS (6-BOLT)
Kleur : BLACK GRAY
Velgbreedte : 25,0 27,5 17,0 OS 0
Naaftype : 15 X 110 12 X 148 TA
Example of a wheelset
WIJ GEBRUIKEN ENKEL DE SL VELGEN!!
Je hebt zeker geen 30mm velgen nodig om een goed XC wielset te gebruiken.
Bij Aluminium velgen is 400gr voor een velg een zeer goede compromis in velgbreedte en gewicht.
HUB EXP 240 DB BOOST FOR THRU AXLE 12MM and THRU AXLE 15MM
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement, which reduces wear, and a smaller number of parts not only makes maintenance easier but also reduces weight.
MATERIAL
Aluminum
FREEHUB SYSTEM
Ratchet EXP 36, option Ratchet EXP 54, Ratchet System
Rim Newmen XA25 ALU 29" IW25mm
TECHNICAL INFORMATION / DESCRIPTION
Lightweight rims with just the right amount of stiffness make for blazing fast XC wheelsets. The NEWMEN FADE rear hub is significantly quieter compared to other hubs which makes for a completely different experience on the trail. Combining this hub technology with the new X.A.25 carbon fiber rim results in a wheelset with focus on durability and light weight.
EVOLUTION SL XA25 29inch 28H MAX. SYSTEM WEIGHT 130KG
Referentie : #90571
Merk : NEWMEN
Gewicht : 400gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK GRAY
Velgbreedte : 25,0 27,5 17,0 OS 0
TECHNICAL INFORMATION / DESCRIPTION
High-end aluminium rim. Due to the high dent resistance achieved by our flared rim flanges it is ideally suited for modern aggressive trail bikes while still being light enough for XC/marathon riders.
Intended use
Cross Country
Diameter
27,5" / 29"
Max. System Weight
130kg
Weight
380g / 400g
Material
6069 Aluminium
Eyelets
no
Washer Required
yes
Rim Profile
hookless tubeless ready
Model Family
Evolution SL
Inner Width
25 mm
Bevat Id
Component
4410
3627
3671
3670
3599
2144
4701
Referentie : ROSWICLRING160
Merk : SWISSSTOP
Gewicht : 8gr.
Materiaal : ALUMINUM
Spaakgaten : Geen info
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype :
CENTERLOCK LOCKRING
MAX. DISC Ø 160 MM
PN:P100006239 EAN:7640121224683
DESCRIPTION
maximum rotor diameter 160 mm
2.15 mm thickness
Referentie : FSD29C/T-33-22ULA
Merk : WP
Gewicht : 325gr.
Materiaal : CARBON UD
Spaakgaten : 28
Remtype : DISC
Kleur : BLACK
Velgbreedte : 28,0 33,0 22,0 OS 2,5
Naaftype :
MTB 29-H22-W33 Carbon Velg
325g (+/- 15g)
Velg hoogte 22 mm
External breedte 33 mm
Internal breedte 28 mm
Use 29ER Mountain Bike XC DC Rim
Finish UD Matte
Production Ultra Light
Tubeless Ready Asymmetrical
Max Spoke tension 130kgf
Referentie : RHP5DH32N157ST
Merk : HOPE
Gewicht : 394gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : IS (6-BOLT)
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 157 TA SUPER BOOST PLUS
Specs
32 Hole
6 bolt disc fitment
157x12mm
Shimano HG Steel or Sram XD Steel freehub options
Key Features
Improved sealing to stop dirt ingress and to reduce drag
New Labyrinth seal has zero drag for incredible freewheeling performance
New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
Increased engagement from 44 to 54 POE
New step down axle design for a stiffer more durable freehub
New hub body profile for increased stiffness without adding weight
Fully serviceable and rebuildable with simple tools
Available with all modern freehub bodies
End spacers can be easily swapped to suit different frame and axle standards
** Deze naaf geeft een evenredige verdeling van spaakspanning links en rechts, een heel stabiel wiel dus!!
Referentie : VLDTFR5413229
Merk : DT SWISS
Gewicht : 605gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK
Velgbreedte : 30,0 35,0 21,0 OS 0,0
Naaftype :
PRODUCT DETAILS
The FR 541 may not be your first rim, but it aspires to be the last. The new rim shape improves the impact resistance, enabling you to push a little harder on the trails. It also enhances the pinch flat protection for a trusty ride on rougher tracks. Build this rim with care and it will reward you with resistance and lightness for a long-lasting bond.
MATERIAL
ALUMINIUM
Referentie : VLDTFR54132275
Merk : DT SWISS
Gewicht : 570gr.
Materiaal : ALUMINUM
Spaakgaten : 32
Remtype : DISC
Kleur : BLACK
Velgbreedte : 30,0 35,0 21,0 OS 0,0
Naaftype :
PRODUCT DETAILS
The FR 541 may not be your first rim, but it aspires to be the last. The new rim shape improves the impact resistance, enabling you to push a little harder on the trails. It also enhances the pinch flat protection for a trusty ride on rougher tracks. Build this rim with care and it will reward you with resistance and lightness for a long-lasting bond.
MATERIAL
ALUMINIUM
Referentie : 05559
Merk : BERD
Gewicht : 0gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
Productomschrijving
Berd Spoke Coloring Kits bevatten alle benodigdheden om je Berd wielen te personaliseren! Speciaal ontworpen voor het kleuren van Berd spaken die al in wielen zitten, bevat elke kit een kwastje om de inkt gemakkelijk op de spaken aan te brengen. In een uur of minder kun je je wielen aanpassen aan één van de acht kleuren, waaronder: Geel, Oranje, Roze, Rood, Blauw, Paars, Groen of Zwart.
Elke kit bevat genoeg inkt om één set wielen te kleuren (twee wielen). Mix en match kleuren om unieke ontwerpen te maken door meerdere kits te bestellen. De inkt kan alleen op witte spaken worden aangebracht.
Inhoud van de kit:
Inkt op alcoholbasis - 1 oz
Schenktuit
Applicator Kwast
Inkt druppelaar
Instructiekaart
Berd Sticker
Berd spokes are made from an advanced polymer called ultra high molecular weight polyethylene (UHMWPE) that has 12 times the strength-to-weight ratio of steel and floats on water. Berd spokes have an improved fatigue life compared to steel and are impervious to the elements.
Check out https://berdspokes.com/pages/technology
Referentie : 05555
Merk : BERD
Gewicht : 0gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
Productomschrijving
Berd Spoke Coloring Kits bevatten alle benodigdheden om je Berd wielen te personaliseren! Speciaal ontworpen voor het kleuren van Berd spaken die al in wielen zitten, bevat elke kit een kwastje om de inkt gemakkelijk op de spaken aan te brengen. In een uur of minder kun je je wielen aanpassen aan één van de acht kleuren, waaronder: Geel, Oranje, Roze, Rood, Blauw, Paars, Groen of Zwart.
Elke kit bevat genoeg inkt om één set wielen te kleuren (twee wielen). Mix en match kleuren om unieke ontwerpen te maken door meerdere kits te bestellen. De inkt kan alleen op witte spaken worden aangebracht.
Inhoud van de kit:
Inkt op alcoholbasis - 1 oz
Schenktuit
Applicator Kwast
Inkt druppelaar
Instructiekaart
Berd Sticker
Berd spokes are made from an advanced polymer called ultra high molecular weight polyethylene (UHMWPE) that has 12 times the strength-to-weight ratio of steel and floats on water. Berd spokes have an improved fatigue life compared to steel and are impervious to the elements.
Check out https://berdspokes.com/pages/technology
Referentie : 4040635
Merk : SUNRACE
Gewicht : 326gr.
Materiaal : STEEL
Spaakgaten : Geen info
Remtype :
Kleur : SILVER
Velgbreedte :
Naaftype :
SUNRACE CASSETTE RACE 11 SPEED 11-32T METALLIC SILVER
Stalen tandwielen, alu spider en sluitring
Metallic Silver finish
Super Fluid Drive
11-12-13-14-15-17-19-21-24-28-32
Referentie : GERA1431000_ZOIZD_SAP1498
Merk : SAPIM
Gewicht : 6.76gr.
Materiaal :
Spaakgaten : Geen info
Remtype :
Kleur : BLACK
Velgbreedte :
Naaftype :
Race
Race is a very popular double butted spoke. Build up tension is easy. Much less torsion and not as elastic as the Laser spokes are the key points. The Race provides a better shock absorption thanks to a thinner middle section than the one of a non-butted spokes. Dealers say about this traditional spoke: “Never change a winning team…”
Technical specs
Weight: 14G (64 pcs x 260 mm lg) 363 g
Quality: Stainless
Strength on middle section: 1300 N/mm2
Dimensions
Length: 135-310 mm
Diameter: 14G 2.0 - 1.8 - 2.0 mm
Options
Rod (without bend) or different bend
Self locking system
Black (oxidised or chromed)
Anti-rotation part
Oval head
2-sides threading
TCS
Referentie : DT Swiss 350 Straight Pull Hub Set MTB Achter
Merk : DT SWISS
Gewicht : 238gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 12 X 148 TA BOOST
PRODUCT DETAILS
Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36 tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence.
MATERIAL
Aluminum
FREEHUB SYSTEM
Ratchet System 36 SL
Referentie : DT Swiss 350 Straight Pull Hub Set MTB Voor
Merk : DT SWISS
Gewicht : 138gr.
Materiaal : ALUMINUM
Spaakgaten : 28
Remtype : CENTERLOCK
Kleur : BLACK
Velgbreedte :
Naaftype : 15 X 110 TA BOOST
PRODUCT DETAILS
Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36 tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence.
MATERIAL
Aluminum
FREEHUB SYSTEM
Ratchet System 36 SL